Canada Gazette, Part I, Volume 148, Number 47: GOVERNMENT NOTICES
November 22, 2014
DEPARTMENT OF CITIZENSHIP AND IMMIGRATION
IMMIGRATION AND REFUGEE PROTECTION ACT
Ministerial Instructions Respecting the Start-up Business Class, 2014
The Minister of Citizenship and Immigration, pursuant to section 14.1 (see footnote a) of the Immigration and Refugee Protection Act (see footnote b), gives the annexed Ministerial Instructions Respecting the Start-up Business Class, 2014.
Ottawa, November 14, 2014
CHRIS ALEXANDER
Minister of Citizenship and Immigration
MINISTERIAL INSTRUCTIONS RESPECTING THE START-UP BUSINESS CLASS, 2014
Definitions
1. The following definitions apply in these Instructions.
“Act”
« Loi »
“Act” means the Immigration and Refugee Protection Act.
“applicant”
« demandeur »
“applicant” means a foreign national who makes an application for a permanent resident visa as a member of the start-up business class.
“Canadian Language Benchmarks”
« Canadian Language Benchmarks »
“Canadian Language Benchmarks” has the same meaning as in section 2 of the Regulations.
“commitment”
« engagement »
“commitment” means a commitment referred to in paragraph 2(2)(a) that meets the requirements of section 6.
“designated”
« désigné »
“designated”, in respect of a business incubator, an angel investor group or a venture capital fund, means designated under section 4.
“investing”
« investir »
“investing” means buying shares or other forms of equity in a qualifying business.
“language skill area”
« habileté langagière »
“language skill area” means speaking, oral comprehension, reading or writing.
“Niveaux de compétence linguistique canadiens”
« Niveaux de compétence linguistique canadiens »
“Niveaux de compétence linguistique canadiens” has the same meaning as in section 2 of the Regulations.
“qualified participant”
« participant admissible »
“qualified participant” means, in respect of a business,
- (a) an applicant in respect of the business;
- (b) a foreign national who has been issued a permanent resident visa as a member of the start-up business class in respect of the business;
- (c) a designated business incubator;
- (d) a designated angel investor group; or
- (e) a designated venture capital fund.
“qualifying business”
« entreprise admissible »
“qualifying business” means a business that meets the requirements of section 7.
“Regulations”
« Règlement »
“Regulations” means the Immigration and Refugee Protection Regulations.
Establishment of start-up business class
2. (1) The start-up business class is established as part of the economic class referred to in subsection 12(2) of the Act and consists of foreign nationals who have the ability to become economically established in Canada and meet the requirements of this section.
Member of class
(2) An applicant is a member of the start-up business class if they
- (a) have obtained a commitment from
- (i) a designated business incubator confirming that it is accepting the applicant's qualifying business into its business incubator program,
- (ii) a designated angel investor group confirming that it is investing at least $75,000 in the applicant's qualifying business or two or more designated angel investor groups confirming that they are together investing a total of at least $75,000 in that business, or
- (iii) a designated venture capital fund confirming that it is investing at least $200,000 in the applicant's qualifying business or two or more designated venture capital funds confirming that they are together investing a total of at least $200,000 in that business;
- (b) have attained a level of proficiency of at least benchmark level 5 in either official language for all the four language skill areas, as set out in the Canadian Language Benchmarks and the Niveaux de compétence linguistique canadiens, as demonstrated by the results of an evaluation conducted by an organization or institution designated by the Minister for the purpose of evaluating language proficiency under subsection 74(3) of the Regulations; and
- (c) have in the form of transferable and available funds, unencumbered by debts or other obligations, an amount that is equal to one half of the amount identified, in the most recent edition of the publication concerning low income cut-offs published annually by Statistics Canada under the Statistics Act, for urban areas of residence of 500,000 persons or more, as the minimum amount of before-tax annual income that is necessary to support a group of persons equal in number to the total number of the applicant and their family members.
Syndication
(3) An applicant who obtains a commitment involving more than one entity is still considered eligible to be a member of the start-up business class if
- (a) the total amount invested in the qualifying business is at least $75,000, in the case of a commitment from or involving a designated angel investor group but not a designated venture capital fund; and
- (b) the total amount invested in the qualifying business is at least $200,000, in the case of a commitment from or involving a designated venture capital fund.
Limit
(4) No more than five applicants are to be considered members of the start-up business class in respect of the same business.
Improper purpose
(5) An applicant is not to be considered a member of the start-up business class if they intend to participate, or have participated, in an agreement or arrangement in respect of the commitment primarily for the purpose of acquiring a status or privilege under the Act and not for the purpose of engaging in the business activity for which the commitment was intended.
Agreements with industry associations
3. (1) The Minister may enter into an agreement with an industry association representing business incubators, angel investor groups or venture capital funds to provide for any matter related to these Instructions, including
- (a) the making of recommendations and the provision of advice to the Minister on the designation of entities of the type represented by the association and on the revocation of such designations;
- (b) the establishment of criteria, standards of conduct and best practices for the making of commitments or the performance of other activities under these Instructions by entities of the type represented by the association;
- (c) the making of recommendations and the provision of advice to the Minister on the operation of these Instructions;
- (d) the establishment of peer review panels to independently assess commitments;
- (e) the submission of reports to the Minister on the activities of its members under these Instructions; and
- (f) any other function or matter considered by the parties to be relevant to these Instructions.
Termination of agreements
(2) The Minister may terminate an agreement if the industry association breaches the agreement or for any other reason specified in the agreement.
Designation
4. For the purposes of these Instructions,
- (a) the entities set out in Schedule 1 are designated as business incubators;
- (b) the entities set out in Schedule 2 are designated as angel investor groups; and
- (c) the entities set out in Schedule 3 are designated as venture capital funds.
Status of entities
5. For greater certainty, a business incubator, an angel investor group or a venture capital fund designated under section 4 is considered not to be under the control of the Minister in respect of any matter relating to these Instructions.
Form of commitment
6. (1) A commitment must be in a written or electronic form that is acceptable to the Minister and be signed by a person with the authority to bind the designated business incubator, designated angel investor group or designated venture capital fund, as the case may be.
Conditional commitment
(2) If two or more applicants make an application that is based on the same commitment, that commitment may be conditional on the issuance of a permanent resident visa to one or more of those applicants.
Contents of commitment — business incubator
(3) A commitment made by a designated business incubator must
- (a) identify the applicant;
- (b) confirm that the applicant's qualifying business has been accepted into its business incubator program;
- (c) specify the period of time for which the applicant will be in the business incubator program if such a period has been established;
- (d) describe the nature of the business operations to be carried out by the applicant;
- (e) describe the applicant's role in the business;
- (f) confirm that the applicant has control over the intellectual property or other assets that the applicant is bringing to the business;
- (g) describe the legal and financial structure of the business;
- (h) identify the role of any other person who holds or is expected to hold an interest in the business and describe their role in the business;
- (i) confirm that it has performed a due diligence assessment of the applicant and the business;
- (j) specify any terms and conditions applicable to its business incubator program or to the commitment; and
- (k) confirm that the business it has accepted into its business incubator program is a qualifying business.
Contents of commitment — angel investor group or venture capital fund
(4) A commitment made by a designated angel investor group or a designated venture capital fund must
- (a) identify the applicant;
- (b) describe the nature of the business operations to be carried out by the applicant;
- (c) describe the applicant's role in the business;
- (d) confirm that the applicant has control over the intellectual property or other assets that the applicant is bringing to the business;
- (e) describe the legal and financial structure of the business;
- (f) identify the role of any other person who holds or is expected to hold an interest in the business and describe their role in the business;
- (g) confirm that the designated angel investor group or the designated venture capital fund has performed a due diligence assessment of the applicant, the business and the investment;
- (h) confirm that the designated angel investor group or the designated venture capital fund is investing in a business that is a qualifying business;
- (i) specify the amount of the investment; and
- (j) specify any terms and conditions applicable to the investment or to the commitment.
Multiple applicants
(5) If there is more than one applicant in respect of the same business, the commitment must
- (a) include information on all the applicants; and
- (b) identify those applicants that the entity making the commitment considers essential to the business.
Qualifying business
7. (1) For the purposes of these Instructions, a corporation that is incorporated in and carrying on business in Canada is a qualifying business if, at the time the commitment is made,
- (a) the applicant holds 10% or more of the voting rights attached to all shares of the corporation outstanding at that time; and
- (b) no persons or entities, other than qualified participants, hold 50% or more of the total amount of the voting rights attached to all shares of the corporation outstanding at that time.
Conditional incorporation of business
(2) A business that is not incorporated at the time the commitment is made is still considered to be a qualifying business if its incorporation is conditional on the issuance of a permanent resident visa to one or more of the applicants in respect of that business.
Documentation
8. (1) An applicant must provide documentation to establish that they are a member of the start-up business class, including
- (a) evidence of payment of the applicable fees set out in these Instructions;
- (b) a signed copy of the commitment;
- (c) written evidence that they have attained the level of language proficiency required by paragraph 2(2)(b); and
- (d) written evidence that they have the funds required by paragraph 2(2)(c).
Conclusive evidence
(2) For the purposes of these Instructions, the results of an evaluation of an applicant's language proficiency by a designated organization or institution and the correlation of those results with the benchmarks in accordance with the Regulations are conclusive evidence of the applicant's proficiency in the official languages of Canada.
Minimal requirements
9. (1) Subject to section 12, an application for a permanent resident visa as a member of the start-up business class must be refused and no further assessment is required if the applicant does not meet the requirements of subsection 2(2).
Multiple applicants
(2) If there is more than one applicant in respect of the same business and one of the applicants, who was identified in the commitment as being essential to the business, is refused a permanent resident visa for any reason, the other applicants must be considered not to have met the requirements of subsection 2(2) and their applications must also be refused.
Application for visa
(3) An officer must issue a permanent resident visa to the applicant and their accompanying family members if the applicant and their family members, whether accompanying or not, are not inadmissible and meet the requirements of the Act, the provisions of the Regulations applicable to the start-up business class and these Instructions.
Production of other documents
10. For the purposes of evaluating an application referred to in subsection 9(1), an officer may, in addition to the documentation listed in subsection 8(1), require the production of documentation relating to the applicant, the commitment and the program or business that is in the possession or control of the applicant or the entity making the commitment.
Peer review
11. (1) An officer may request that a commitment in respect of a qualifying business in an application referred to in subsection 9(1) be independently assessed by a peer review panel established under an agreement referred to in section 3 by an industry association representing the type of entity making the commitment.
Grounds for review
(2) A request referred to in subsection (1) may be made if the officer is of the opinion that such an assessment would assist in the application process. It may also be made on a random basis.
Independent assessment
(3) The peer review panel must provide the officer with its assessment of whether due diligence was performed by the entity that made the commitment.
Final decision
(4) The officer must consider the assessment provided by the peer review panel, but is not bound by it when making a decision as to whether the applicant meets the requirements of these Instructions.
Status of peer review panel
(5) For greater certainty, a peer review panel is considered not to be under the control of the Minister in respect of any matter relating to these Instructions.
Substituted evaluation
12. (1) Whether or not an applicant meets the requirements set out in subsection 2(2), an officer may substitute their evaluation of the applicant's ability to become economically established in Canada if those requirements are not a sufficient indicator of whether the applicant will become economically established in Canada.
Exception
(2) Despite subsection (1), if an applicant does not meet the requirement set out in paragraph 2(2)(a), an officer is not authorized under that subsection to substitute a positive evaluation of the applicant's ability to become economically established in Canada.
Concurrence
(3) An evaluation made under subsection (1) requires the written concurrence of a second officer.
Processing fees
13. The following fees are payable for processing an application for a permanent resident visa in respect of the start-up business class:
- (a) in respect of a principal applicant, $1,050;
- (b) in respect of a family member of the principal applicant who is 22 years of age or older or is less than 22 years of age and is a spouse or common-law partner, $550; and
- (c) in respect of a family member of the principal applicant who is less than 22 years of age and is not a spouse or common-law partner, $150.
Non-application
14. (1) The following provisions of the Regulations do not apply to the start-up business class:
- (a) sections 108 and 109; and
- (b) paragraph 295(1)(c).
Application of section 107 of Regulations
(2) Section 107 of the Regulations applies to the start-up business class, with such modifications as the circumstances require.
Repeal
15. The Ministerial Instructions Respecting the Start-up Business Class, 2013-2, published in the Canada Gazette, Part I, on October 26, 2013 are repealed.
Effective period
16. These Instructions have effect during the period beginning on November 22, 2014 and ending on March 31, 2018.
SCHEDULE 1
(Paragraph 4(a))
DESIGNATED BUSINESS INCUBATORS
- Canada Accelerator Co (d/b/a Highline)
- Communitech
- Empowered Startups Ltd.
- Extreme Innovations
- INcubes Inc.
- Innovacorp
- Innovate Calgary
- Launchpad PEI Inc.
- Ryerson Futures Inc.
- Toronto Business Development Centre
- Waterloo Accelerator Centre
SCHEDULE 2
(Paragraph 4(b))
DESIGNATED ANGEL INVESTOR GROUPS
- Angel One Network Inc.
- First Angel Network Association
- Golden Triangle Angel Network
- Oak Mason Investments Inc.
- TenX Angel Investors Inc.
SCHEDULE 3
(Paragraph 4(c))
DESIGNATED VENTURE CAPITAL FUNDS
- Advantage Growth (No.2) L.P.
- BDC Venture Capital
- Blackberry Partners Fund II LP (d.b.a. Relay Ventures Fund II)
- Canadian Accelerator Fund Ltd.
- Celtic House Venture Partners Fund III LP
- Celtic House Venture Partners Fund IV LP
- DRI Capital Inc.
- Extreme Venture Partners LLP
- Golden Opportunities Fund Inc.
- INOVIA CAPITAL INC.
- Lumira Capital
- MaRS Cleantech Fund LP
- Mobio Technologies Inc.
- New Brunswick Innovation Foundation Inc. / Fondation de l'innovation du Nouveau-Brunswick Inc.
- Oak Mason Investments Inc.
- OMERS Ventures Management Inc.
- Ontario SME Capital Corporation
- Pangaea Ventures Fund III, LP
- PRIVEQ III Limited Partnership
- PRIVEQ IV Limited Partnership
- Quorum Investment Pool Limited Partnership
- Quorum Secured Equity Trust
- Real Ventures
- Rho Canada Ventures
- Rogers Venture Partners, LLC
- Summerhill Venture Partners Management Inc.
- Tandem Expansion Management Inc.
- Top Renergy Inc.
- Vanedge Capital Limited Partnership
- Version One Ventures
- Wellington Financial LP
- Westcap Mgt. Ltd.
- Yaletown Venture Partners Inc.
[47-1-o]
DEPARTMENT OF THE ENVIRONMENT
CANADIAN ENVIRONMENTAL PROTECTION ACT, 1999
Ministerial Condition No. 17799
Ministerial Condition
(Paragraph 84(1)(a) of the Canadian Environmental Protection Act, 1999)
Whereas the Minister of the Environment and the Minister of Health have assessed information pertaining to the substance poly(oxy-1,2-ethanediyl), α-[2-[tetrahydro-1 (2H)-pyrimidinyl) alkyl]-ω-hydroxy-, N-tallow alkyl derivs., di-Me sulfatequaternized;
And whereas the ministers suspect that the substance is toxic or capable of becoming toxic within the meaning of section 64 of the Canadian Environmental Protection Act, 1999;
The Minister of the Environment, pursuant to paragraph 84(1)(a) of the Canadian Environmental Protection Act, 1999, hereby permits the manufacture or import of the substance in accordance with the conditions of the following annex.
November 10, 2014
LEONA AGLUKKAQ
Minister of the Environment
ANNEX
Conditions
(Paragraph 84(1)(a) of the Canadian Environmental Protection Act, 1999)
1. The following definitions apply in these ministerial conditions:
“notifier” means the person who has, on July 29, 2014, provided to the Minister of the Environment the prescribed information concerning the substance, in accordance with subsection 81(1) of the Canadian Environmental Protection Act, 1999;
“substance” means poly(oxy-1,2-ethanediyl), α-[2-[tetrahydro-1 (2H)-pyrimidinyl) alkyl]-ω-hydroxy-, N-tallow alkyl derivs., di-Me sulfate-quaternized; and
“waste” includes effluents resulting from rinsing vessels used for the substance or blending equipment, any spillage that contains the substance, process effluents that contain the substance and any residual amounts of the substance in any vessel.
2. The notifier may import or manufacture the substance in accordance with the present ministerial conditions.
Restrictions
3. The notifier may import or manufacture the substance to use it only in corrosion inhibitor formulations used for oil and gas production or to transfer its physical possession or control to a person who will use it only in these applications.
4. At least 120 days prior to beginning manufacturing the substance in Canada, the notifier shall inform the Minister of the Environment, in writing, and provide the following information:
- (a) the information specified in paragraphs 5(c) to (f) of Schedule 10 to the New Substances Notification Regulations (Chemicals and Polymers);
- (b) the information specified in paragraph 11(c) of Schedule 11 to those Regulations;
- (c) a brief description of the manufacturing process that details the reactants and monomers used, reaction stoichiometry, batch or continuous nature of the process and scale of the process;
- (d) a flow diagram of the manufacturing process that includes features such as process tanks, holding tanks and distillation towers; and
- (e) a brief description of the major steps in manufacturing operations, the chemical conversions, the points of entry of all reactants, the points of release of the substance and the processes to eliminate environmental releases.
Handling and Disposal of the Substance
5. The notifier or the person to whom the substance has been transferred must collect any waste in their physical possession or under their control and destroy or dispose of it in the following manner:
- (a) deep well injection in accordance with the laws of the jurisdiction where the well is located;
- (b) incineration in accordance with the laws of the jurisdiction where the incineration facility is located; or
- (c) deposition in a secure landfill, in accordance with the laws of the jurisdiction where the landfill is located.
Environmental Release
6. Where any release of the substance to the environment occurs other than its use in corrosion inhibitor formulations used for oil and gas production, the person who has the physical possession or control of the substance shall immediately take all measures necessary to prevent any further release, and to limit the dispersion of any release. Furthermore, the person shall, as soon as possible in the circumstances, inform the Minister of the Environment by contacting an enforcement officer designated under the Canadian Environmental Protection Act, 1999.
Record-keeping Requirements
7. (1) The notifier shall maintain electronic or paper records, with any documentation supporting the validity of the information contained in these records, indicating
- (a) the use of the substance;
- (b) the quantity of the substance that the notifier manufactures, imports, purchases, sells and uses;
- (c) the name and address of each person to whom the notifier transfers the physical possession or control of the substance; and
- (d) the name and address of each person in Canada who has disposed of the substance or of waste for the notifier, the method used to do so and the quantities of the substance or waste shipped to that person.
(2) The notifier shall maintain the electronic or paper records mentioned in subsection (1) at the notifier's principal place of business in Canada for a period of at least five years after they are made.
Other Requirements
8. The notifier shall inform any person to whom they transfer the physical possession or control of the substance or of waste in writing of the terms of the present ministerial conditions. The notifier shall obtain, prior to any transfer of the substance or waste, written confirmation from this person that they were informed of the terms of the present ministerial conditions. This written confirmation shall be maintained at the principal place of business in Canada of the notifier or of the representative of that person in Canada for a period of at least five years from the day it was received.
Coming into Force
9. These ministerial conditions come into force on November 10, 2014.
[47-1-o]
DEPARTMENT OF HEALTH
HAZARDOUS MATERIALS INFORMATION REVIEW ACT
Filing of claims for exemption
Pursuant to paragraph 12(1)(a) of the Hazardous Materials Information Review Act, the Chief Screening Officer of the Workplace Hazardous Materials Directorate hereby gives notice of the filing of the claims for exemption listed below.
In accordance with subsection 12(2) of the Hazardous Materials Information Review Act, affected parties may make written representations to the screening officer with respect to the claim for exemption and the material safety data sheet to which it relates. “Affected parties” means a person who is not a competitor of the claimant and who uses, supplies or is otherwise involved in the use or supply of the controlled product at a work place, and includes
- (a) a supplier of the controlled product;
- (b) an employee at the work place;
- (c) an employer at the work place;
- (d) a safety and health professional for the work place;
- (e) a safety and health representative or a member of a safety and health committee for the work place; and
- (f) a person who is authorized in writing to represent
- (i) a supplier referred to in paragraph (a) or an employer referred to in paragraph (c), or
- (ii) an employee referred to in paragraph (b), except where that person is an official or a representative of a trade union that is not certified or recognized in respect of the work place.
Written representations respecting a claim for exemption cited in the present notice, or respecting the material safety data sheet or label to which the claim relates, must cite the appropriate registry number, state the reasons and evidence upon which the representations are based and be delivered within 30 days of the date of the publication of this notice in the Canada Gazette, Part I, to the screening officer at the following address: Workplace Hazardous Materials Bureau, 269 Laurier Avenue West, 4th Floor, Ottawa, Ontario K1A 0K9.
ROSSLYNN MILLER-LEE
Chief Screening Officer
The claims listed below seek a business exemption from the disclosure of employer confidential information in respect of a controlled product. The confidential information would otherwise be required to be disclosed by the provisions of the applicable provincial legislation relating to occupational health and safety.
| Claimant | Product Identifier (As shown on the MSDS) | Subject of the Claim for Exemption | Registry Number |
|---|---|---|---|
Rohm and Haas Canada LP, |
MONOMER QM-1565 | Chemical identity of one ingredient |
9257 |
SaskPower, |
BDPS ICCS DC-103 Lean, In-Service Amine Absorbent: aka "Lean CO2 Amine" | Chemical identity of six ingredients, concentration of three ingredients, and chemical name, common name, generic name, trade name or brand name of a controlled product | 9275 |
SaskPower, |
BDPS ICCS DS |
Chemical identity of six ingredients, concentration of three ingredients, and chemical name, common name, generic name, trade name or brand name of a controlled product | 9276 |
SaskPower, |
BDPS ICCS DC-103 |
Chemical identity of seven ingredients, concentration of three ingredients, and chemical name, common name, generic name, trade name or brand name of a controlled product | 9277 |
SaskPower, |
BDPS ICCS DS |
Chemical identity of six ingredients, concentration of three ingredients, and chemical name, common name, generic name, trade name or brand name of a controlled product | 9278 |
The claims listed below seek exemption from the disclosure of supplier confidential business information in respect of a controlled product; such disclosure would otherwise be required under the provisions of the Hazardous Products Act.
| Claimant | Product Identifier (As shown on the MSDS) | Subject of the Claim for Exemption | Registry Number |
|---|---|---|---|
Elementis Specialties, Inc., |
THIXATROL® D45 | Chemical identity of one ingredient | 9248 |
Elementis Specialties, Inc., |
THIXATROL® DW | Chemical identity of two ingredients | 9249 |
Elementis Specialties, Inc., |
THIXATROL® DW50 | Chemical identity of one ingredient | 9250 |
MeadWestvaco Corp. |
INDULIN® 206 | Chemical identity of one ingredient | 9251 |
Halliburton Energy Services, Inc., |
BDF™-642 | Chemical identity and concentration of one ingredient | 9252 |
Dow Chemical Canada ULC, |
UCARSOLTM HS SOLVENT 115C | Chemical identity and concentration of two ingredients | 9253 |
Dow Chemical Canada ULC, |
DOWTM IC 110 FORMULATED IRON CHELATE MIXTURE | Chemical identity of three ingredients | 9254 |
JFB Hart Coatings, Inc., |
GLOSSTEKTM 100 PART B | Chemical identity of two ingredients | 9255 |
JFB Hart Coatings, Inc., |
GLOSSTEKTM 400 PART B | Chemical identity of two ingredients | 9256 |
MeadWestvaco Corp. |
INDULIN® SA-L | Chemical identity of one ingredient | 9258 |
Chevron Oronite Company LLC, |
LUBAD 1737 | Chemical identity of two ingredients | 9259 |
Cytec Industries Inc., |
OREPREP® F-603 Frother | Chemical identity of two ingredients | 9260 |
Rohm and Haas Canada LP, |
PREFERRED DC-15 | Chemical identity of two ingredients | 9261 |
Champion Technologies Ltd., |
Emulsotron XZ-1677C | Chemical identity and concentration of two ingredients | 9262 |
Guardian Chemicals Inc., |
PRESSGUARD MO | Chemical identity and concentration of three ingredients | 9263 |
Stepan Company, |
ALPHA-STEP LD-450 | Chemical identity of eight ingredients | 9264 |
Hydro Technologies (Canada) Inc., |
HY BRITE® RC-3180 | Chemical identity and concentration of one ingredient | 9265 |
Nalco Canada Co., |
NALCO® EC1510A | Chemical identity of five ingredients | 9266 |
MeadWestvaco Corp. |
PCX-1944 (Export Only) | Chemical identity and concentration of one ingredient | 9267 |
Champion Technologies Ltd., |
Surfatron DN-158 | Chemical identity and concentration of three ingredients | 9268 |
Cytec Industries Inc., |
ACORGA® DXT55 Solvent Extraction Reagent | Chemical identity of one ingredient | 9269 |
MeadWestvaco Corp. |
EnvaMulTM 1740 | Chemical identity and concentration of three ingredients | 9270 |
MeadWestvaco Corp. |
EnvaMulTM 1884 | Chemical identity and concentration of two ingredients | 9271 |
The Lubrizol Corporation, |
LUBRIZOL® IG93MA | Chemical identity of three ingredients | 9272 |
Chemguard, |
CHEMGUARD S-764P | Chemical identity and concentration of one ingredient | 9273 |
Afton Chemical Corporation, |
HiTEC® 3418M Performance Additive | Chemical identity of eight ingredients | 9274 |
Champion Technologies Ltd., |
Emulsotron X-8127 | Chemical identity and concentration of one ingredient | 9279 |
MeadWestvaco Corp. |
PC-2016 | Chemical identity and concentration of three ingredients | 9280 |
DuPont Electronic |
7105 | Chemical identity of one ingredient | 9281 |
DuPont Electronic and Communication |
5642 | Chemical identity of one ingredient | 9282 |
E.I. DuPont Canada Company, |
EndimalTM PT | Chemical identity of two ingredients | 9283 |
E.I. DuPont Canada Company, |
Endimal® 500 | Chemical identity of one ingredient | 9284 |
Momentive Performance Materials, |
Niax® silicone L-6189 | Chemical identity of two ingredients | 9285 |
Momentive Performance Materials, |
Silbreak™ 743 demulsifier | Chemical identity of two ingredients | 9286 |
CESI Chemical, |
FE-7 | Chemical identity and concentration of two ingredients | 9287 |
CESI Chemical, |
FE-8 | Chemical identity and concentration of one ingredient | 9288 |
GE Water & Process Technologies Canada, |
DM20350 | Chemical identity and concentration of one ingredient | 9289 |
Champion Technologies Ltd., |
Assure HI-203 | Chemical identity and concentration of one ingredient | 9290 |
IPAC Chemicals Ltd., |
Envirobind DCT | Chemical identity and concentration of one ingredient | 9291 |
Trican Well Service Ltd., |
FC-2 | Chemical identity and concentration of one ingredient | 9292 |
BASF Canada Inc., |
Cyclanon Washoff XC-W New | Chemical identity of one ingredient | 9293 |
[47-1-o]
DEPARTMENT OF INDUSTRY
RADIOCOMMUNICATION ACT
Notice No. SMSE-019-14 — Release of RSS-Gen, Issue 4, and RSP-100, Issue 10
Notice is hereby given by Industry Canada that the following documents will come into force upon publication on the Industry Canada Web site:
- Radio Standards Specification RSS-Gen, Issue 4, General Requirements for Compliance of Radio Apparatus, which sets out the general requirements for radio apparatus used for radiocommunication other than broadcasting; and
- Radio Standards Procedure RSP-100, Issue 10, Certification of Radio Apparatus, which sets out the requirements for certification of radio apparatus and broadcasting equipment.
The above-mentioned documents were published to reflect the technical and certification requirements for equipment.
General information
These documents have been coordinated with industry through the Radio Advisory Board of Canada.
The radio equipment technical standards lists will be amended to reflect the above-mentioned changes.
Submitting comments
Interested parties are requested to provide their comments within 120 days of the date of publication of this notice in electronic format (Microsoft Word or Adobe PDF) to the Manager, Radio Equipment Standards (res.nmr@ic.gc.ca).
All submissions received by the close of the comment period will be posted on Industry Canada's Spectrum Management and Telecommunications Web site at http://www.ic.gc.ca/spectrum.
Obtaining copies
Copies of this notice and of documents referred to herein are available electronically on Industry Canada's Spectrum Management and Telecommunications Web site at http://www.ic.gc.ca/spectrum.
Official versions of Canada Gazette notices can be viewed at http://www.gazette.gc.ca/rp-pr/p1/index-eng.html.
October 2014
DANIEL DUGUAY
Acting Director General
Engineering, Planning and Standards Branch
[47-1-o]
DEPARTMENT OF TRANSPORT
CANADA MARINE ACT
Trois-Rivières Port Authority — Supplementary letters patent
BY THE MINISTER OF TRANSPORT
WHEREAS letters patent were issued by the Minister of Transport (“Minister”) for the Trois-Rivières Port Authority (“Authority”), under the authority of the Canada Marine Act (“Act”), effective May 1, 1999;
WHEREAS Schedule C of the letters patent sets out the immovables, other than federal immovables, held or occupied by the Authority;
WHEREAS, pursuant to subsection 46(2.1) of the Act, the Authority wishes to acquire the immovable known and described as being lot 1 018 883 of the cadastre of Quebec (“Immovable”) from Karine Lanouette;
WHEREAS the board of directors of the Authority has requested that the Minister issue supplementary letters patent to set out the Immovable in Schedule C of the letters patent;
AND WHEREAS the Minister is satisfied that the amendment to the letters patent is consistent with the Act;
NOW THEREFORE, pursuant to subsection 9(1) of the Act, the letters patent are amended as follows:
| Lot Number | Description |
|---|---|
| 1 018 883 | An immovable known and designated as being lot 1 018 883 of the cadastre of Quebec, registration division of Trois-Rivières, city of Trois-Rivières, as described in the certificate of location and shown on the accompanying plan prepared July 29, 2014, under number 3341 of the minutes of Michel Plante, land surveyor, containing an area of 578.3 m2. |
2. These supplementary letters patent take effect on the date of registration in the Land Register of Quebec, Registration Division of Trois-Rivières, of the deed of sale evidencing the transfer of the Immovable from Karine Lanouette to the Authority.
ISSUED under my hand this 31st day of October, 2014.
_______________________________
The Honourable Lisa Raitt, P.C., M.P.
Minister of Transport
[47-1-o]
OFFICE OF THE SUPERINTENDENT OF FINANCIAL INSTITUTIONS
BANK ACT
Alliance Data Systems Corporation — Approval to have a financial establishment in Canada
Notice is hereby given, pursuant to subsection 522.21(1) of the Bank Act, that the Minister of Finance approved, on October 9, 2014, Alliance Data Systems Corporation to have a financial establishment in Canada.
October 29, 2014
JEREMY RUDIN
Superintendent of Financial Institutions
[47-1-o]