Canada Gazette, Part I, Volume 160, Number 47: SUPPLEMENT
November 21, 2026
DEPARTMENT OF THE ENVIRONMENT
CANADIAN ENVIRONMENTAL PROTECTION ACT, 1999
Notice with respect to the Proposed Amendments to the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector
Whereas an assessment of the Benzotriazoles and Benzothiazoles Group conducted under section 68 of the Canadian Environmental Protection Act, 1999 (“CEPA” or “the Act”) has concluded that 2-mercaptobenzothiazole (MBT) and its precursors meet one or more of the criteria set out in section 64 of the Act;
And whereas on March 8, 2025, the Minister of the Environment and the Minister of Health published in the Canada Gazette, Part I, a statement pursuant to section 77 of the Act indicating their intention to recommend that MBT and its precursors be added to Part 2 of Schedule 1 of the Act,
Notice is hereby given pursuant to subsection 54(4) of CEPA that the Minister of the Environment proposes to amend the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector under subsection 54(1) of the Act.
This notice and the annexed amended release guidelines are published to satisfy the requirements of subparagraph 91(1)(a)(i) of the Act for a regulation or instrument respecting preventive or control action in relation to MBT and its precursors.
Any person may, within 60 days after the date of publication of this notice, file with the Minister of the Environment written comments with respect to the proposed amendments to the release guidelines. All comments must be sent to the Risk Management and CEPA Regulatory Development Division of Environment and Climate Change Canada at the following address: pgpc-dppc-cmp-cpd@ec.gc.ca.
Information on the proposed amendments to the release guidelines can be found on the Government of Canadaâs website.
October 18, 2026
Jacinthe David
Director General
Industrial Sectors and Chemicals Directorate
On behalf of the Minister of the Environment
Proposed Amendments to the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector
Preface: Summary of the Proposed Amendments to the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector
The Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector (Guidelines) were published on April 4, 2026. It is proposed that the Guidelines be amended to include 2-mercaptobenzothiazole (MBT) and its precursors.
MBT and its precursors are used as rubber processing chemicals and may be released into wastewater during weighing of raw powders and during compounding mixer loading operations at industrial solid rubber compounding facilities. On March 7, 2025, the Assessment - Benzothiazoles and Benzotriazoles Group was published and concluded that MBT and its precursors are considered toxic under paragraph 64(a) of the Canadian Environmental Protection Act, 1999 (CEPA). This means that they may be entering the environment in a quantity or concentration that may be harmful to the environment or its biological diversity. At the same time, a proposed risk management approach was published indicating that the Government of Canada plans to implement a control instrument under CEPA to address industrial releases of MBT and its precursors where appropriate.
The following summarizes the key proposed amendments to the Guidelines:
- Definitions
- Addition of a definition for “MBT moiety” to provide clarity throughout the Guidelines.
- Scope
- Addition of MBT and its precursors as substances of concern.
- Section 6 — Effluent Sampling
- Addition of minimum reporting limits for substances identified for sampling but lacking a standardized analytical method. This ensures data consistency and accountability across all facilities regardless of the testing laboratory used.
- Appendix 1 — Concentration Targets for Substances of Concern
- Establishment of a specific concentration target for MBT in Appendix 1.
- Appendix 3 — Annual Evaluation Report
- Addition of MBT-specific parameters, including wastewater removal rates (for primary and secondary treatment) and sector-specific loss fractions for the rubber product manufacturing sector.
- Introduction of a methodology to estimate the annual MBT moiety based on the specific MBT precursors used at a facility.
- Appendix 5 — Analytical Methods
- Addition of a note indicating that a standardized method for MBT in water is under development and will be incorporated into the Guidelines once finalized.
Definitions
- “concentration target”
- means the maximum concentration of the substance of concern in the industrial effluent when considering wastewater treatment.
- âfacilityâ
- means all buildings, equipment, structures and stationary items that are located on a single site or on contiguous or adjacent sites and that are owned or operated by the same person and that collectively function as a single integrated site where rubber product manufacturing activities are conducted.
- âfinal discharge pointâ
- means an identifiable discharge point beyond which the facility no longer exercises control over the quality or quantity of the effluent.
- âindustrial effluentâ
- means effluent discharged from a facility.
- âMBT moietyâ
- means the amount of the 2-mercaptobenzothiazole (MBT) structural unit present or formed from a given amount of a precursor substance.
- ânormal operating conditionsâ
- means conditions that are representative of regular or typical operating conditions related to the rubber product manufacturing activities undertaken at the facility.
- âpredicted no-effect concentrationâ or âPNECâ
- means the concentration of the substance of concern in the aquatic environment below which no adverse effects are predicted for aquatic organisms.
- ârubber product manufacturingâ or âRPMâ
- means tire manufacturing, other rubber product manufacturing (e.g. hoses, automotive parts, gaskets), and rubber compounding. The following North American Industry Classification System (NAICS) codes apply to this sector: 3262 Rubber product manufacturing, 32621 Tire manufacturing, 32622 Rubber and plastic hose and belting manufacturing, and 32629 Other rubber product manufacturing.
- âsubstances of concernâ
- means certain substances used in rubber product manufacturing in Canada that have been concluded toxic under the Canadian Environmental Protection Act, 1999. These substances, along with their Chemical Abstracts Service Registry Number (CAS RN), are listed in Appendix 1.
- âverificationâ
- means a process carried out by Environment and Climate Change Canada (ECCC) officials or representatives to review, assess and confirm the information and claims made in reports submitted under these Guidelines.
1. Introduction
Chemicals used in the rubber product manufacturing (RPM) sector include vulcanizing agents, accelerators, activators, protective agents (e.g. antioxidants and antiozonants), plasticizers, and process aids. The substances of concern originating from industrial effluent of RPM facilities were identified as having potential ecological effects when released to surface water.
The Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector (“Guidelines”) were selected as the preferred risk management approach to streamline efforts across multiple toxic substances in the RPM sector, given these substances shared exposure pathways and similar ecological toxicity, and the involvement of a limited number of common facilities. These Guidelines are intended to reduce risks from certain chemicals used in the RPM sector in Canada that have been concluded as toxic under the Canadian Environmental Protection Act, 1999 (CEPA).
These Guidelines recommend concentration targets based on the predicted no-effect concentration (PNEC) for the substances of concern listed in Appendix 1.
Participation in these Guidelines is voluntary, and failure to participate will not trigger enforcement action.
2. Purpose
The purpose of these Guidelines is to provide guidance and recommend concentration targets to minimize industrial effluent releases of substances of concern.
These Guidelines are not a substitute for existing regulatory requirements of the municipal, provincial/territorial, or federal authorities. Commitment by companies to follow these Guidelines does not remove obligations to comply with all applicable statutory and regulatory requirements.
The implementation of these Guidelines does not exempt any person/entity from complying with subsection 36(3) of the Fisheries Act, which prohibits the release or deposit of a deleterious substance in water frequented by fish, within the meaning of this term in the Fisheries Act, or in any place where such deposit or release may enter such water. Any concentration targets found in these Guidelines do not constitute an authorization to deposit for the purposes of the Act, and deposits below, equal to, or above them that are found to be deleterious and contravene the Act may be subject to enforcement action.
3. Scope
These Guidelines apply to any person/entity who owns or operates a facility that
- uses any of the substances of concern; and
- releases an industrial effluent containing any of the substances of concern.
4. Concentration targets
Recommended concentration targets are provided in Appendix 1 for the substances of concern and are based on the PNEC for each substance.
For facilities with an on-site wastewater treatment system, these concentration targets apply to the industrial effluent prior to its entrance into the on-site wastewater treatment system. For facilities that send their industrial effluent to an off-site wastewater treatment system, the concentration targets apply at the facilityâs final discharge point.
The approach for assessing whether the concentration targets are met is described in Appendix 3 and takes into consideration the expected removal rate of the substances of concern through wastewater treatment.
5. Performance objectives
Any person/entity to which these Guidelines apply should
- minimize releases of substances of concern from its facilities so that they meet the concentration targets (the procedure to estimate a facilityâs concentration of substances of concern is found in Appendix 3);
- conduct effluent sampling, where applicable, to determine the effluent concentration for the applicable substances of concern, as outlined in section 6;
- apply the best management practices outlined in the Code of Practice for the Environmentally Sound Management of Chemical Substances in the Chemicals, Plastics and Rubber Sectors that are applicable to the substances of concern at the facility; and
- report annually, as outlined in section 7.
6. Effluent sampling
For substances identified for sampling in Appendix 1, industrial effluent sampling should be conducted at the facilityâs final discharge point.
Note on MBT and its precursors: Effluent sampling requirements for MBT and its precursors will apply once a standardized analytical method is finalized. As noted in Appendix 5, an analytical method is currently under development and is expected to be completed prior to the final publication of these amended Guidelines.
Samples of industrial effluent from the facility should be collected under normal operating conditions during the industrial use of the substances of concern. As some substances may be sensitive to factors such as light, temperature, oxygen, or pH, facilities are encouraged to consult with the laboratory that will conduct the chemical analysis to determine appropriate sample collection, handling, and storage procedures.
Industrial effluent samples from the facility should be collected and analyzed at a minimum frequency of two times per calendar year, with a minimum of at least 2 months between sampling events. The first sample of a substance identified for sampling should be collected and analyzed within 10 months of a facility having these Guidelines apply to it with respect to that substance.
Samples collected should be analyzed in accordance with the methods listed in Appendix 5.
Analysis of samples should be performed by a laboratory that meets the following conditions at the time of the analysis:
- (a) it is accredited
- (i) under the International Organization for Standardization standard ISO/IEC 17025, entitled General requirements for the competence of testing and calibration laboratories, by an accrediting body that is a signatory to the International Laboratory Accreditation Cooperation Mutual Recognition Arrangement, or
- (ii) under the Environment Quality Act, CQLR, c. Q-2; and
- (b) the scope of its accreditation includes the parameters that are analyzed.
If no method has been recognized by a standards development organization in respect of the parameters that are analyzed, and the scope of the laboratoryâs accreditation does not therefore include those parameters, the analysis should be performed in accordance with standards of good scientific practice that are generally accepted at the time that it is performed.
In addition, analysis should include reporting based on a minimum reporting limit (MRL) for each substance of concern. The MRL should be set equal to 10% of the PNEC for that substance of concern, as follows:
- MRL for BENPAT = 0.10 x 0.43 ”g/L = 0.043 ”g/L
- MRL for MBT = 0.10 x 2.1 ”g/L = 0.21 ”g/L
7. Reporting
7.1 Declaration of the operator
The person/entity responsible for a facility to which these Guidelines apply should inform, in writing, the Minister of Environment of the intention to implement these Guidelines by completing the Declaration of the operator provided in Appendix 2.
Declarations should be submitted according to the following deadlines.
| Substance category | Status | Due date |
|---|---|---|
| BENPAT and TMTD | Using substances as of April 4, 2026 | October 4, 2026 |
| Started using substances after April 4, 2026 | Within six (6) months of initial use | |
| MBT and its precursors | Using substances as of the date of the final amendments | Within six (6) months of the date of the final amendments |
| Started using substances after the date of the final amendments | Within six (6) months of initial use |
If the person/entity does not use or permanently ceases to use any of the substances of concern, the person/entity should inform, in writing, the Minister of Environment by completing a new Declaration of the operator provided in Appendix 2.
7.2 Annual evaluation report
Any person/entity to which these Guidelines apply should provide ECCC with an annual evaluation report for every calendar year a substance of concern is used, by June 1 of the following calendar year. The template in Appendix 3 should be used to complete the report.
- For BENPAT and TMTD, which were included in the initial publication of these Guidelines, the first annual evaluation report will be due by June 1, 2027, for the 2026 calendar year.
- For MBT and its precursors, which are proposed to be added through these amendments, the first annual report would be due by June 1, 2029, for the 2028 calendar year.
7.3 Sampling reporting exception
If sampling conducted in accordance with section 6 results in effluent concentrations lower than the concentration targets, as determined based on calculations found in part 3 of Appendix 3, for the substances of concern for three full consecutive calendar years (herein referred to as the sampling years), that facility may pause sampling. The facility should start to sample again if the average daily use for the reporting year exceeds that of the highest of the last three sampling years, if processes change, and/or if the best practices implemented during the last three sampling years are no longer in use.
If a facility meets the conditions for this sampling reporting exception, they should submit the declaration of sampling reporting exception provided in Appendix 4 confirming that sampling is not needed for the reporting year and that section 3 of the annual evaluation report will not be submitted. This declaration is only required once upon meeting the exception criteria and does not need to be submitted annually unless the exception conditions change.
8. Record keeping
Any person/entity to which these Guidelines apply should retain all records pertaining to these Guidelines for at least five years beginning on the date of their creation and make them available to the Minister of Environment upon request. It is important that the person/entity keep all such records, including but not limited to operational and process data, such as quantities of substances used, flow rates, process changes, monitoring and analysis data such as lab results and sampling details, environmental and incident reports such as spill reports and corrective actions, and records on best management practices that are adopted, including any documentation on their effectiveness in controlling releases of substances of concern.
9. Verification
Desktop verification activities will be carried out after the submission of annual evaluation reports by ECCC. ECCC representatives may contact facilities via phone or email to request clarification on details submitted in the annual reports. Additionally, they may ask to review records, request supporting data, or conduct interviews to clarify information or gather additional details.
10. Performance measurement
Based on the review and verification of information submitted under these Guidelines, ECCC will assess the effectiveness of these Guidelines in meeting its risk management objectives and publish progress reports every two years on the Government of Canadaâs website.
Progress reports will highlight the number of facilities participating in these Guidelines by sector and by region, and the extent to which they are following these Guidelines.
11. Confidentiality
Any person who provides information to the Minister of the Environment under these Guidelines may request that it be treated as confidential under section 313 of the Canadian Environmental Protection Act, 1999. The request for confidentiality must be made in writing and accompanied by reasons taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Contact information
All reports and declarations under these Guidelines should be sent to
Industrial Sectors and Chemicals Directorate
Environmental Protection Branch
Environment and Climate Change Canada
Government of Canada
Email: pgpc-dppc-cmp-cpd@ec.gc.ca
References
Environment and Climate Change Canada. 2011. Proposed Risk Management Approach for 1,4-Benzenediamine, N,N′-mixed Phenyl and tolyl derivatives (BENPAT) —Chemical Abstract Service Registry Number (CAS RN): 68953-84-4. Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada, Health Canada. 2011. (ARCHIVED) Screening Assessment for the Challenge 1,4-Benzenediamine, N,N′-mixed Phenyl and tolyl derivatives and 1,4-Benzenediamine, N,N′-mixed tolyl and xylyl derivatives — Chemical Abstracts Service Registry Number 68953-84-4 and 68478-45-5. Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada. 2021. Risk management approach for Thioperoxydicarbonic diamide ([(H2N)C(S)]2S2), tetramethyl- (TMTD) in the Thiocarbamates Group. Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada, Health Canada. 2021. Screening assessment — Thiocarbamates Group. Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada. 2023. Code of Practice for the Environmentally Sound Management of Chemical Substances in the Chemicals, Plastics and Rubber Sectors. Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada. 2025. Risk management approach for 2-mercaptobenzothiazole (MBT) and its precursors (from the Benzotriazoles and Benzothiazoles Group). Ottawa (Ontario): Government of Canada.
Environment and Climate Change Canada, Health Canada. 2025. Assessment — Benzotriazoles and Benzothiazoles Group. Ottawa (Ontario): Government of Canada.
Appendix 1 — Concentration Targets for Substances of Concern
| CAS RN | Substance name | Other names | Concentration target (”g/L) | Sampling | Laboratory analytical method available |
|---|---|---|---|---|---|
| 68953-84-4 | 1,4-Benzenediamine, N,N′-mixed phenyl and tolyl derivatives | BENPAT | 0.43 | Yes | Yes |
| 137-26-8 | Thioperoxydicarbonic diamide ([(H2N)C(S)]2S2), tetramethyl- | TMTD | 0.19 | No | No table b1 note a |
| 149-30-4 | 2(3H)-Benzothiazolethione (2-Mercaptobenzothiazole) | MBT | 2.1 | Yes | To be determined |
| 95-31-8 table b1 note b | 2-Benzothiazolesulfenamide, N-(1,1-dimethylethyl) | TBBS | These benzothiazole precursors will break down to MBT in water. Therefore, the concentration target for MBT and corresponding analytical method for MBT will be used to measure the MBT moiety in water. | ||
| 95-33-0 table b1 note b | 2-Benzothiazolesulfenamide, N-cyclohexyl- | CBS | |||
| 120-78-5 table b1 note b | Benzothiazole, 2,2′-dithiobis- | MBTS | |||
| 2492-26-4 table b1 note b | 2(3H)-Benzothiazolethione, sodium salt | SMBT | |||
| 4979-32-2 table b1 note b | 2-Benzothiazolesulfenamide, N,N-dicyclohexyl- | DCBS | |||
| 95-32-9 table b1 note b | Benzothiazole, 2-(4-morpholinyldithio)- | MMBT | |||
| 3741-80-8 table b1 note b | 2-Benzothiazolesulfenamide, N-(2-benzothiazolylthio)-N-(1,1-dimethylethyl)- | N/A | |||
| 102-77-2 table b1 note b | Morpholine, 4-(2-benzothiazolylthio)- (MOR) | MOR | |||
Table b1 note(s)
|
|||||
Appendix 2 — Declaration of the Operator
Please note that there is important information included in the Privacy Act Notice Statement found at the end of this appendix.
This form may be used as a template for the purpose of subsection 7.1 of these Guidelines.
- Contact information
- name of participating company/corporation:
- facility address where the evaluation is performed:
- name of operator or duly authorized representative:
- email address:
- telephone number:
- Declaration
☐ Our facility is not using any of the substances of concern targeted by the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector.
- ☐ Our facility will no longer be using substances of concern targeted by the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector as of (month/day/year).
- ☐ Our facility currently uses at least one of the substances of concern targeted by the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector and we intend to follow the Guidelines. The substance(s) used are indicated below:
- ☐ BENPAT ☐ TMTD ☐ MBT and its precursors
- ☐ Our facility uses at least one of the substances of concern and does not intend to follow the Release Guidelines for Chemicals Used in the Rubber Product Manufacturing Sector.
Representative name (print)
Title
Representative signature
Date of signature
Confidentiality
Any person who provides information to the Minister of the Environment under these Guidelines may request that it be treated as confidential under section 313 of the Canadian Environmental Protection Act, 1999. The request for confidentiality must be made in writing and accompanied by reasons taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Please indicate which parts of the information submitted should be treated as confidential, and the reasons, taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Privacy Act Notice Statement
The personal information is collected under the authority of section 5 of the Department of the Environment Act and subsection 7(1) of the Financial Administration Act.
The information is collected, used and disclosed by ECCC for the purpose of policy analysis, regulatory options, research, program operations and/or communications. Your participation and decision to provide any information are voluntary.
The personal information created, held or collected by ECCC is protected under the Privacy Act. Information will be used, disclosed and retained in accordance with the conditions listed in the Personal Information Bank Outreach Activities PSU 938.
Any questions or comments regarding this privacy notice may be directed to ECCCâs Access to Information and Privacy Division at ECATIP-ECAIPRP@ec.gc.ca. If you are not satisfied that your privacy has been adequately respected, you have the right to file a complaint. You may contact the Office of the Privacy Commissioner of Canada by calling its information centre at 1‑800‑282‑1376 or by visiting its website.
Appendix 3 — Annual evaluation report
Please note that there is important information included in the Privacy Act Notice Statement found at the end of this appendix.
- Contact information
- name of participating company/corporation:
- facility address where the evaluation is performed:
- name of operator or duly authorized representative:
- email address:
- telephone number:
- reporting year:
- Procedure to estimate the industrial effluent concentration of a substance of concern and evaluation criteria
Step 1: Estimate the quantity of the substance of concern used (kg/year)
- For BENPAT and TMTD, the substance of concern used is the total quantity in kilograms of the substance of concern used at the facility in a given calendar year.
- For MBT and its precursors, the substance of concern used is the total quantity of MBT moiety used in kilograms per year. This approach accounts for the fact that certain substances of concern used in the RPM sector contain the MBT structure (or “moiety”) as part of their molecular composition. To estimate the total MBT moiety, mass fractions are applied to each precursor substance. A mass fraction represents the proportion (by weight) of the MBT moiety within the full molecular weight of a given compound.
- The total quantity of MBT moiety used is estimated using the following equation and the mass fractions found in Table 1.
- Where:
- A to I
- are the annual quantities (in kg/year) of each substance of concern used listed in Table 1.
- The coefficients
- are the mass fractions of MBT moiety in each substance of concern listed in Table 1.
- M
- is the mass fraction of MBT moiety for additional unlisted MBT precursors.
- Q
- is the quantity (kg/year) of those other unlisted MBT precursors.
| Symbol | Substance name | CAS RN | Mass fraction |
|---|---|---|---|
| A | N-tert-butyl-2-benzothiazylsulfenamide (TBBS) | 95-31-8 | 0.70 |
| B | 2-Benzothiazolesulfenamide, N-cyclohexyl- (CBS) | 95-33-0 | 0.63 |
| C | Benzothiazole, 2,2′-dithiobis- (MBTS) | 120-78-5 | 1.0 |
| D | 2(3H)-Benzothiazolethione (MBT) | 149-30-4 | 1.0 |
| E | 2-Benzothiazolesulfenamide, N,N-dicyclohexyl- (DCBS) | 4979-32-2 | 0.48 |
| F | 2(3H)-Benzothiazolethione, sodium salt (SMBT) | 2492-26-4 | 0.88 |
| G | Benzothiazole, 2-(4-morpholinyldithio)- (MMBT) | 95-32-9 | 0.59 |
| H | 2-Benzothiazolesulfenamide, N-(2-benzothiazolylthio)-N-(1,1-dimethylethyl)- (TBSI) | 3741-80-8 | 0.83 |
| I | Morpholine, 4-(2-benzothiazolylthio)- (MOR) | 102-77-2 | 0.66 |
Step 2: Estimate the quantity of the substance of concern remaining in industrial effluent when considering wastewater treatment (kg/day)
- Where:
- âQuantityâ
- is the quantity in kilograms per day of the substance of concern remaining in industrial effluent when considering wastewater treatment.
- âSubstance of concern usedâ
- is the total quantity in kilograms of the substance of concern used at the facility during the declaration year, as calculated in Step 1.
- âRelease daysâ
- is the total number of days during the reporting year the facility is operational (i.e. releases effluent).
- âLâ
- is the fraction of the substance of concern lost to wastewater. See default assumptions below for values.
Notes:- These values may not be reflective of the best management practices at the facility and assume all steps of the manufacturing process occur at the same facility.
- If using an assumption that differs from the default assumption, please provide the assumption and justification in the criteria section below.
- “RRon”
- is the on-site wastewater treatment system removal rate (fraction). See default assumptions below for RRon values.
- âRRoffâ
- is the off-site wastewater treatment system removal rate (fraction). See default assumptions below for RRoff values.
Note:- If using an assumption that differs from the default assumption, please provide the assumption and justification in the criteria section below.
- Default assumptions:
-
- BENPATfootnote 1
- L = 0.01
- RRon = 0.17 for primary treatment or 0.48 for secondary treatment
- RRoff = 0.17 for primary treatment or 0.48 for secondary treatment
- TMTDfootnote 2
- L = 0.0003
- RRon = 0.16 for secondary treatment
- RRoff = 0.16 for secondary treatment
- MBT and its precursorsfootnote 3
- L = 0.0003
- RRon = 0.10 for on-site pre-treatment removal or 0.62 for secondary treatment
- RRoff = 0.62 for secondary treatment
- BENPATfootnote 1
Step 3: Estimate the industrial effluent concentration (”g/L) of the substance of concern when considering wastewater treatment
- Where:
- âCEFFâ
- is the industrial effluent concentration of the substance of concern in micrograms per litre when considering wastewater treatment.
- âQuantityâ
- is the estimated quantity in kilograms per day of the substance of concern remaining in the effluent when considering wastewater treatment, as calculated in Step 2.
- âQEFFâ
- the average daily industrial effluent flow rate in litres per day. If unknown, use the following estimation:
| Evaluation criteria | Result/Comments |
|---|---|
| Quantity of substance of concern used (kg/year) | BENPAT TMTD MBT moiety |
| L - Fraction lost to wastewater (If using an assumption that differs from the one provided in Step 1, please provide the assumption and justification.) |
BENPAT TMTD MBT moiety Justification: |
| Release days | days |
| Wastewater treatment type | Onsite: Primary ☐ Secondary ☐ Offsite: Primary ☐ Secondary ☐ Other (specify) ☐ |
| If facility sends their effluent for wastewater treatment offsite, wastewater treatment plant name. | |
| RR - Wastewater removal rates (fraction). (If using an assumption that differs from the one provided in Step 1, please provide assumption and justification.) |
BENPAT RRon (Onsite): RRoff (Offsite): TMTD RRon (Onsite): RRoff (Offsite): MBT moiety RRon (Onsite): RRoff (Offsite): Justification: |
| Estimated quantity of the substance of concern remaining in the effluent when considering wastewater treatment (kg/day) | BENPAT TMTD MBT moiety |
| QEFF – Average daily industrial effluent flow rate (L/day) | |
| CEFF – Industrial effluent concentration of the substance of concern when considering wastewater treatment (”g/L) | BENPAT TMTD MBT moiety |
Is CEFF lower than the corresponding concentration target?
|
BENPAT: Yes ☐ No ☐ N/A ☐ TMTD: Yes ☐ No ☐ N/A ☐ MBT moiety: Yes ☐ No ☐ N/A ☐ |
| If CEFF is higher than any of the applicable corresponding concentration targets, please explain what best management practices or other mitigation measures will be implemented to reduce the concentration of the substance of concern released from the facility. |
3. Sampling and analysis as per section 6 of these Guidelines
Was sampling conducted in accordance with section 6 of these Guidelines? If no, please explain: |
BENPAT: Yes ☐ No ☐ N/A ☐ MBT moiety: Yes ☐ No ☐ N/A ☐ |
|---|---|
Date and sample concentration at final discharge point (”g /L) |
First sampling event: BENPAT sample concentration:
Date: MBT moiety sample concentration:
Date: |
Second sampling event: BENPAT sample concentration:
Date: MBT moiety sample concentration:
Date: |
|
If industrial effluent releases are sent to an off-site wastewater treatment system (with or without on-site treatment): Apply the appropriate wastewater treatment removal rate as follows:
If industrial effluent releases are not sent to an off-site wastewater treatment system:
|
First sampling event: Date: CEST BENPAT: Date: CEST MBT moiety: |
Second sampling event: Date: CEST BENPAT: Date: CEST MBT moiety: |
|
Were samples taken at the final discharge point of the facility and collected under normal operating conditions? If no, please explain: |
Yes ☐ No ☐ |
Were samples analyzed in accordance with the methods listed in Appendix 5? If no, please explain (describe the method used and provide the detection limit, accuracy and precision of the method): |
Yes ☐ No ☐ Justification: |
Is the CEST comparable to the CEFF calculated in Step 3 above? If not, are you aware of why these differences exist? |
Yes ☐ No ☐ Justification: |
4. Reporting on implementation of best management practices
Has the facility applied the best management practices as outlined in the Code of Practice for the Environmentally Sound Management of Chemical Substances in the Chemicals, Plastics and Rubber Sectors that are applicable to the substance of concern at the facility as per section 5 of these Guidelines? Yes ☐ No ☐
Has the facility completed and submitted the evaluation checklist (Appendix 1 of the Code of Practice for the Environmentally Sound Management of Chemical Substances in the Chemicals, Plastics and Rubber Sectors)?
- Yes ☐ You do not need to complete the table below.
- No ☐ Please complete the table below.
| Best management practices with corresponding section of the Code of Practice for the Environmentally Sound Management of Chemical Substances in the Chemicals, Plastics and Rubber Sectors | Implemented | Comments Explain why implementation was not carried out or does not apply to the facility |
|---|---|---|
| 3.1 Environmental Management System | Yes ☐ No ☐ N/A ☐ | |
| 3.1 Training program that include environmental best practices | Yes ☐ No ☐ N/A ☐ | |
| 3.1 Pollution Prevention Assessment recently done | Yes ☐ No ☐ N/A ☐ | |
| 3.2 Continuous improvement process led by senior management | Yes ☐ No ☐ N/A ☐ | |
| 3.3 Record-keeping system that include environmental best practices | Yes ☐ No ☐ N/A ☐ | |
| 4.2 Design and layout considerations for facility area | Yes ☐ No ☐ N/A ☐ | |
| 4.3 Receipt of packaged and bulk material | Yes ☐ No ☐ N/A ☐ | |
| 4.4 Receipt and unloading of bulk solid and liquid shipments | Yes ☐ No ☐ N/A ☐ | |
| 4.5 Receipt of gas cylinders | Yes ☐ No ☐ N/A ☐ | |
| 5.1 Purchasing and inventory of chemical substances | Yes ☐ No ☐ N/A ☐ | |
| 5.2 General storage of chemical substances | Yes ☐ No ☐ N/A ☐ | |
| 5.3 Storage of packaged chemical substances | Yes ☐ No ☐ N/A ☐ | |
| 5.4 Storage of flexible intermediate bulk containers (FIBCs) | Yes ☐ No ☐ N/A ☐ | |
| 5.5 Storage of bulk chemical substances | Yes ☐ No ☐ N/A ☐ | |
| 5.6 Storage of chemical substances in gas cylinders | Yes ☐ No ☐ N/A ☐ | |
| 6.1 General best practices for transfer of chemical substances | Yes ☐ No ☐ N/A ☐ | |
| 6.2 Transfer of chemicals from FIBCs | Yes ☐ No ☐ N/A ☐ | |
| 6.3 Transfer of chemicals from bags | Yes ☐ No ☐ N/A ☐ | |
| 6.4 Transfer of chemicals from drums, pails and IBCs | Yes ☐ No ☐ N/A ☐ | |
| 6.5 Gas cylinders and related equipment | Yes ☐ No ☐ N/A ☐ | |
| 7.1 Preventing chemical substances releases to air | Yes ☐ No ☐ N/A ☐ | |
| 7.2 Preventing chemical substances releases to water | Yes ☐ No ☐ N/A ☐ | |
| 8.1 Package selection and means of transportation | Yes ☐ No ☐ N/A ☐ | |
| 8.2 Packaging, loading and securing small packaging containers | Yes ☐ No ☐ N/A ☐ | |
| 8.3 Loading bulk shipments | Yes ☐ No ☐ N/A ☐ | |
| 9.2 Container cleaning | Yes ☐ No ☐ N/A ☐ | |
| 9.3 Tank cleaning | Yes ☐ No ☐ N/A ☐ | |
| 9.4 Cleaning of plastic pellet cars and trucks | Yes ☐ No ☐ N/A ☐ | |
| 9.5 Cleaning of batch process equipment | Yes ☐ No ☐ N/A ☐ | |
| 10.1 Used packaging | Yes ☐ No ☐ N/A ☐ | |
| 10.2 Waste process materials | Yes ☐ No ☐ N/A ☐ | |
| 10.3 Management of waste | Yes ☐ No ☐ N/A ☐ | |
| 10.4 Waste storage | Yes ☐ No ☐ N/A ☐ | |
| 10.5 Waste documentation | Yes ☐ No ☐ N/A ☐ | |
| 11.1 Maintenance of equipment | Yes ☐ No ☐ N/A ☐ | |
| 11.2 Preventing leaks | Yes ☐ No ☐ N/A ☐ | |
| 11.3 Cleaning and housekeeping | Yes ☐ No ☐ N/A ☐ | |
| 11.4 Personal protective equipment/clothing | Yes ☐ No ☐ N/A ☐ | |
| 11.5 Vehicles | Yes ☐ No ☐ N/A ☐ | |
| 11.6 Maintenance and housekeeping contractors | Yes ☐ No ☐ N/A ☐ | |
| 12.1 Advanced planning for spill prevention and management | Yes ☐ No ☐ N/A ☐ | |
| 12.2 Actions to take in the event of a spill | Yes ☐ No ☐ N/A ☐ |
Confidentiality
Any person who provides information to the Minister of the Environment under these Guidelines may request that it be treated as confidential under section 313 of the Canadian Environmental Protection Act, 1999. The request for confidentiality must be made in writing and accompanied by reasons taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Please indicate which part of the information submitted should be treated as confidential, and the reasons, taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Privacy Act Notice Statement
The personal information is collected under the authority of section 5 of the Department of the Environment Act and subsection 7(1) of the Financial Administration Act.
The information is collected, used and disclosed by ECCC for the purpose of policy analysis, regulatory options, research, program operations and/or communications. Your participation and decision to provide any information are voluntary.
The personal information created, held or collected by ECCC is protected under the Privacy Act. Information will be used, disclosed and retained in accordance with the conditions listed in the Personal Information Bank Outreach Activities PSU 938.
Any questions or comments regarding this privacy notice may be directed to ECCCâs Access to Information and Privacy Division at ECATIP-ECAIPRP@ec.gc.ca. If you are not satisfied that your privacy has been adequately respected, you have the right to file a complaint. You may contact the Office of the Privacy Commissioner of Canada by calling its information centre at 1‑800‑282‑1376 or by visiting its website.
Appendix 4 — Declaration of Sampling Reporting Exception
Please note that there is important information included in the Privacy Act Notice Statement found at the end of this appendix.
This form may be used as a template for a facility to declare that they meet the criteria in subsection 7.3 of these Guidelines.
- Contact information
- name of participating company/corporation:
- facility address where the evaluation is performed:
- name of operator or duly authorized representative:
- email address:
- telephone number:
- Reporting year:
- Declarations
If the answer to each question below is yes, you are confirming that the sampling and reporting guidance does not apply to your facility for this reporting year.
| Sampling has been conducted in accordance with section 6 and resulted in effluent concentrations lower than the concentration target for three full consecutive calendar years (herein referred to as the sampling years). | BENPAT: Yes ☐ No ☐ N/A ☐ MBT and its precursors: Yes ☐ No ☐ N/A ☐ |
|---|---|
| The average daily use for the reporting year does not exceed that of the highest of the previous three sampling years. | BENPAT: Yes ☐ No ☐ N/A ☐ MBT and its precursors: Yes ☐ No ☐ N/A ☐ |
| The processes at the facility have remained the same since the last three sampling years. | BENPAT: Yes ☐ No ☐ N/A ☐ MBT and its precursors: Yes ☐ No ☐ N/A ☐ |
| The best practices implemented during the last three sampling years are still in use. | BENPAT: Yes ☐ No ☐ N/A ☐ MBT and its precursors: Yes ☐ No ☐ N/A ☐ |
Representative name (print)
Title
Representative signature
Date of signature
Confidentiality
Any person who provides information to the Minister of the Environment under these Guidelines may request that it be treated as confidential under section 313 of the Canadian Environmental Protection Act, 1999. The request for confidentiality must be made in writing and accompanied by reasons taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Please indicate which part of the information submitted should be treated as confidential, and the reasons, taking into account the criteria set out in paragraphs 20(1)(a) to (d) of the Access to Information Act.
Privacy Act Notice Statement
The personal information is collected under the authority of section 5 of the Department of the Environment Act and subsection 7(1) of the Financial Administration Act.
The information is collected, used and disclosed by ECCC for the purpose of policy analysis, regulatory options, research, program operations and/or communications. Your participation and decision to provide any information are voluntary.
The personal information created, held or collected by ECCC is protected under the Privacy Act. Information will be used, disclosed and retained in accordance with the conditions listed in the Personal Information Bank Outreach Activities PSU 938.
Any questions or comments regarding this privacy notice may be directed to ECCCâs Access to Information and Privacy Division at ECATIP-ECAIPRP@ec.gc.ca. If you are not satisfied that your privacy has been adequately respected, you have the right to file a complaint. You may contact the Office of the Privacy Commissioner of Canada by calling its information centre at 1‑800‑282‑1376 or by visiting its website.
Appendix 5 — Analytical Methods
For a copy of an analytical method, please contact pgpc-dppc-cmp-cpd@ec.gc.ca
- SOP-LAB28, BENPAT in Water – The Analysis of BENPAT Antioxidants in Waters by Solid Phase Extraction (SPE) and Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS), Pacific Rim Laboratories Inc.
- Note: A standardized method for MBT in water is under development and will be added to these Guidelines once finalized (expected to be finalized prior to final publication of the amended Guidelines).