Order Amending the United States Surtax Remission Order (SOR/2018-205): SOR/2018-289

Canada Gazette, Part II, Volume 152, Number 26

Registration

SOR/2018-289 December 17, 2018

CUSTOMS TARIFF

P.C. 2018-1611 December 14, 2018

Her Excellency the Governor General in Council, on the recommendation of the Minister of Finance, pursuant to section 115 footnote a of the Customs Tariff footnote b, makes the annexed Order Amending the United States Surtax Remission Order (SOR/2018-205).

Order Amending the United States Surtax Remission Order (SOR/2018-205)

Amendments

1 Section 1 of the United States Surtax Remission Order footnote 1 is replaced by the following:

Remission

1 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the United States Surtax Order (Steel and Aluminum) in respect of the goods referred to in Schedules 1, 2 or 3.

Conditions

(2) Remission referred to in subsection (1) is granted on the following conditions:

2 (1) Subsection 2(1) of the Order is replaced by the following:

Remission

2 (1) Subject to subsection (2), remission is granted of surtaxes paid or payable under the United States Surtax Order (Other Goods) in respect of goods referred to in Schedule 4.

(2) Paragraph 2(2)(b) of the Order is replaced by the following:

3 Schedules 1 and 2 to the Order are replaced by Schedules 1 to 4 set out in the schedule to this Order.

Coming into Force

4 This Order comes into force on the day on which it is registered.

SCHEDULE

(Section 3)

SCHEDULE 1

(Subsection 1(1) and paragraph 1(2)(a))

Item

Column 1

Description of Goods

1

Semi-finished product of cold-rolled annealed spring steel of grade SAE 1095

2

Flat-rolled product, of a width of 600 mm or more, not further worked than hot-rolled, pickled, of grade ASTM A1039 (500LA), of a nominal thickness of 0.039 inch

3

Flat-rolled product of grade HPS 70 W

4

Flat-rolled product for production of large diameter line pipe of grade X65 or X70 (API 5L)

5

Flat-rolled product, not further worked than cold-rolled, in coils, of Martensitic grades

6

Flat-rolled product, batch annealed tin plate

7

Flat-rolled product of iron, non-alloy or other alloy steel, electrogalvanized

8

Flat-rolled product, galvanized, of grade TRIP TRC400Y/690T, of a width of 600 mm or more, of a thickness of 0.057 inch or more

9

Flat-rolled product, galvannealed, of grade ASTM A653/HSLA 050XK, of a width of 70 inches

10

Flat-rolled product, with aluminized coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401

11

Flat-rolled product of iron, non-alloy or other alloy steel, aluminized

12

Flat-rolled product, not further worked than cold-rolled, of specification MS-264-060XK

13

Flat-rolled product, not further worked than cold-rolled, of grade C1010 SAEJ403, of tensile strength from 70,000 to 84,000 psi inclusive, of elongation on 2 inches of 3%, of a minimum yield strength of 65,000 psi

14

Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.25 inch, of a width exceeding 8 inches

15

Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.375 inch, of a width exceeding 10 inches

16

Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.5 inch, of a width exceeding 10 inches

17

Flat-rolled product, of iron or non-alloy steel, not further worked than forged, hot-rolled, hot-drawn or hot-extruded, of rectangular (other than square) cross-section, of a thickness of 0.625 inch, of a width exceeding 10 inches

18

Semi-finished product or bar and rod, of ductile cast iron of grade 65-45-12

19

Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 197 HBW and maximum 237 HBW, of a minimum tensile strength of 95,000 psi, of a minimum yield strength of 75,000 psi, of a diameter of up to 12 inches inclusive

20

Bar and rod, of grade 4140, vacuum degassed, of hardness of minimum of 205 HBW and maximum of 237 HBW, of a minimum tensile strength of 100,000 psi, of a minimum yield strength of 80,000 psi, of a diameter of up to 12 inches inclusive

21

Bar and rod, of grade 4130, vacuum degassed, of hardness of minimum 237 HBW, of a minimum tensile strength of 115,000 psi, of a minimum yield strength of 100,000 psi, of a diameter of up to 12 inches inclusive

22

Bar and rod, of grade 4140 or 4145, vacuum degassed, of hardness of minimum of 253 HBW, of a minimum tensile strength of 125,000 psi, of a minimum yield strength of 110,000 psi, of a diameter of up to 12 inches inclusive

23

Bar and rod, of grade 4140, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 34 RC or of a minimum yield strength of up to 130,000 psi

24

Bar and rod, of grade 4340, heat treated and stress relieved, of a diameter of up to 12 inches, and of a hardness of minimum 32 RC and maximum 36 RC or of a minimum yield strength of up to 140,000 psi

25

Bar and rod, annealed, of grade 4140, of a diameter of less than 4 inches or more than 7 inches

26

Bar and rod, of grade 8620, of a diameter of more than 7 inches

27

Bar and rod, of proprietary grade SW85, of a diameter from 4.0625 to 12 inches inclusive

28

Bar and rod, of iron or non-alloy steel, of grade AISI 1018 (ASTM A108), of a diameter of more than 7 inches

29

Bar and rod, of iron or non-alloy steel, nitrocarburized or oxidized, of a minimum yield strength of 75,000 psi, of maximum surface finish of 16 RMS

30

Bar and rod, of iron or non-alloy steel, of grade ASTM A108, of a diameter of more than 4 inches

31

Bar and rod, of iron or non-alloy steel, chrome plated, of a minimum yield strength of up to 120,000 psi

32

Standard I sections S of 3 inches by 5.7 inches, of specification ASTM A529 Grade 50

33

Bar and rod, hot-rolled, in irregularly wound coils, of stainless steel, of grade 17-7, 201, 208Lsi, 302, 302HQ, 304, 304L, 305, 308L, 309L, 309Lsi, 310, 314, 316, 316L, 316Lsi, 321, 327, 409, 409NB, 410, 420, 430, 430L or 450

34

Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade 13-8, 15-5, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430, 450 or AMS Custom 465

35

Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grade 13-8, 15-5, 17-4, 201, 303, 304, 304L, 316, 316L, 321, 327, 409, 410, 420, 430 or 450, of a diameter of less than 8 inches

36

Bar and rod, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450, of a diameter of less than 8 inches

37

Bar and rod, of stainless steel, chrome plated

38

Angle, shape and section, of stainless steel, of grade 201, 304, 304L, 316, 316L, 321, 327, 409, 420, 430 or 450

39

Wire of stainless steel, hot-rolled and annealed, soap coated, of type 304L, of a diameter of 0.312 inch

40

Wire of stainless steel, nickel and soap coated, of type 302 (ASTM A313 specification), of a diameter of up to 5.25 mm

41

Wire of stainless steel, nickel and soap coated, of type 17-7PH (ASTM A313 specification), of a diameter of up to 5.25 mm

42

Flat-rolled product, of grade Mangabraze

43

Flat-rolled product, aluminized, of specification GMW2M-ST-S-CR5-T1M-120

44

Bar and rod, of grade 4715, vacuum degassed, of hardness of minimum 56 HRC and maximum 62 HRC, of a minimum tensile strength of 119,000 psi, of a minimum yield strength of 95,000 psi, of a diameter of up to 7 inches

45

Bar and rod of grade 1522CV

46

Bar and rod of alloy Aermet 100

47

Bar and rod of grade FX-XTRA, of a diameter of up to 16 inches

48

Bar and rod of grade mold lens quality (MLQ) P20

49

Bar and rod of grade MD P-20

50

Bar and rod of proprietary grade Microtec 4M95

51

Bar and rod of proprietary grade Impact 7

52

Bar and rod of grade 5140H

53

W-section beams

54

Chrome silicon spring wire

55

Wire of chrome silicon valve quality

56

Pipe and tube, drawn over mandrel (DOM) of specification SP-TU-001

57

Pipe and tube, drawn over mandrel (DOM) of specification ASTM A513 Type 5

58

Pipe and tube, cold drawn, seamless

59

Pipe and tube, seamless, cold drawn of specification SP-TU-009

60

Pipe and tube, seamless, hot-rolled of specification SP-TU-002

61

Pipe and tube, hot finished seamless pressure tubing, of grade 1026, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive

62

Pipe and tube, hot finished seamless pressure tubing, of grade 4130, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive

63

Pipe and tube, hot finished seamless pressure tubing, of grade 4140, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive

64

Pipe and tube, hot finished seamless pressure tubing, of proprietary grade Impact 7, of an outside diameter from 3 inches to 24 inches inclusive, of a wall thickness from 0.5 inch to 4 inches inclusive

65

Coiled tubing, of an outside diameter from 0.75 inch to 3.5 inches inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch inclusive, of a kind used in drilling for oil or gas

66

Pipe and tube, of iron, non-alloy or other alloy steel, aluminized

67

Pipe and tube, of circular, square, rectangular or other non-circular cross section, of iron, non-alloy steel, alloy steel or stainless steel, in-line galvanized

68

Pipe and tube, welded, of grade 4140, of circular cross-section

69

Pipe and tube, welded, of grade 4142, of circular cross-section

70

Pipe and tube, straight seam, electric resistance welded, of circular cross-section of an outside diameter of more than 16 inches up to 20 inches inclusive, of a wall thickness of up to 0.625 inches, of grade CSA G40.21

71

Pipe and tube, electric resistance welded (ERW) drawn over mandrel (DOM) of any specification

72

Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.125 inch, of outside diameter of 0.405 inch

73

Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.25 inch (6.35 mm), of outside diameter of 0.540 inch

74

Pipe and tube, electric resistance welded (ERW), of nominal pipe size of 0.375 inch, of outside diameter of 0.675 inch

75

Coiled tubing, of other alloy steel, of an outside diameter from 0.75 inch to 3.5 inch inclusive, of a length of up 10,000 meters, of a wall thickness from 0.08 inch to 0.3 inch

76

Pipe and tube, of square section, of a cross-sectional dimension of more than 12 inches up to 16 inches inclusive

77

Pipe and tube, straight seam, electric resistance welded, of square and equivalent rectangular sections, of dimensions of more than 12 inches by 12 inches up to 16 inches by 16 inches inclusive, of thickness of up to 0.625 inch, of grade CSA G40.21, ASTM A252 or ASTM A500

78

Pipe and tube, straight seam, electric resistance welded, of square section, of dimension of 1.5 inch by 1.5 inch, of a thickness of 0.25 inch, of grade CSA G40.21, ASTM A252 or ASTM A500

79

Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 1526

80

Pipe and tube, welded, of non-circular cross-section other than square or rectangular, of grade AISI 4130

81

Aluminum plate, sheet and strip, of alloy AA3002, AA3003, AA3004, AA3104, AA3105, AA3105-H12, AA3105-H24, AA5005, AA5052, AA5083, AA5086, AA5182, AA5205, AA5251, AA5454, AA5657, AA5754, AA6005A, AA6014, AA6016, AA6061, AA6083, AA6111, AA6181A/AA6005A or AA6451, of a thickness from 0.2 mm to 9.2 mm inclusive

82

Aluminum composite material consisting of aluminum sheets bonded by a thermoplastic core

83

Aluminum cans of 89 ml, 148 ml, 201 ml, 222 ml, 236 ml, 248 ml, 250 ml, 296 ml, 300 ml, 354 ml, 355 ml, 375 ml, 473 ml, 500 ml, 568 ml, 710 ml, 740 ml, 941 ml or 946 ml

84

Flat-rolled product, not further worked than hot-rolled, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm

85

Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 420LA, of specification SAE2340, of a minimum thickness from 0.055 inch to 0.066 inch inclusive

86

Flat-rolled product, hot-rolled, pickled and oiled, of grade HSLA 500LA, of specification GMW3032M-ST-S, of a minimum thickness of 0.045 inch

87

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.06 inch, of a width of 51.9 inches or 56.5 inches

88

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 50, of a minimum thickness of 0.066 inch, of a width of 53.1 inches

89

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.047 inch or 0.058 inch

90

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a nominal thickness of 0.063 inch, of a width of 48.475 inches

91

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.066 inch, of a width of 50.9 inch

92

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 60, of a minimum thickness of 0.067 inch, of a width of 47.4 inches or 53.2 inches

93

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.044 inch to 0.06 inch inclusive

94

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a nominal thickness of 0.063 inch or 0.064 inch

95

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.067 inch, of a width of 55.916 inches

96

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness from 0.073 inch, of a width of 59.186 inches

97

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 70, of a minimum thickness of 0.075 inch, of a width of 54.3, 54.67, 55.5 or 56.5 inches

98

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.067 inch, of a width of 50.8 inches

99

Flat-rolled product, not further worked than hot-rolled, pickled, of grade HSLA 80, of a minimum thickness of 0.066 inch, of a width of 52.423 or 54.2 inches

100

Flat-rolled product, not further worked than hot-rolled, of grade Ympress 100XF, of a thickness of 0.5 inches, of a width of 60 inches, of a length of 120 inches

101

Flat-rolled product, not further worked than cold-rolled, of grade CR420LA, of specification GMW3032M-ST-S, of a thickness of 0.08 inches or more

102

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0566 inch, of a width of 45.863 inches

103

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 70, of a minimum thickness of 0.0606 inch, of a width of 46.3 inches

104

Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a thickness from 0.055 inch to 0.165 inch inclusive, of a width from 24.98 inches to 48 inches inclusive, of a length from 48 inches to 120 inches inclusive

105

Flat-rolled product, galvanized, of specification HR-550-610-LA-S-G160/60 U, of a nominal thickness of less than 2.0 mm

106

Flat-rolled product, galvanized, of specification GMW3023M-ST-S-HR550LA, of a nominal thickness of less than 2.0 mm

107

Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch

108

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.0667, 0.067, 0.073, 0.074 or 0.0743 inch

109

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches

110

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches

111

Cold-rolled and hot dipped steel substrate coil, of Grade 50 or 80, of specification ASTM A792, plated or coated with aluminum-zinc alloys, of a thickness of 3.81 mm, of a width of 1041.4 mm

112

Flat-rolled product, aluminum-silicon coated, of proprietary grade Usibor 1500, of a thickness from 0.8 mm to 2.5 mm inclusive, of a width of up to 1650 mm

113

Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade SA516 Gr 70 normalized, of a thickness of 4.5 inches, of a width of less than 600 mm

114

Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 10B2, of a nominal thickness of 0.12 inch, of a width of 3.65 or 5.2 inches

115

Flat-rolled product, not further worked than cold-rolled, of grade 1074, of a width from 1.575 inches to 9.5 inches inclusive, of a thickness from 0.032 inch to 0.125 inch inclusive

116

Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade C1050 or C1075, of specification ASTM A682 or A684, of a thickness of 0.0098 inch or more

117

Flat-rolled product of iron or non-alloy steel, nickel and brass coated or plated by an electro-plating process, of a width of less than 600 mm

118

Bar and rod, hot-rolled, of grade A105, A350, 1018, 1030, 1040, 1045, 1050 or 1055, vacuum degassed, of a diameter from 2.5 inches to 10 inches inclusive

119

Bar and rod, of grade A36, of a thickness of 1.5 inches, of a width of 1.625 inches, of a length of 5.5 inches

120

Bar and rod, not further worked than hot-rolled, of grade 4140, of a diameter from 7 inches to 12 inches inclusive, of a minimum yield strength of up to 60,000 psi

121

Bar and rod, of grade 60, of specification ASTM A615 or AASHTO M31, epoxy coated, of a diameter from 0.5 inch to 2 inches inclusive, of a length of 18 inches

122

Cold drawn bar, of grade 1018, of a diameter from 4.5 inches to 5.75 inches inclusive, of specification ASTM A108

123

Cold drawn bar, of grade 1144, of a diameter from 2.5 inches to 4.5 inches inclusive, of specification ASTM A311, of a minimum yield strength of 100,000 psi

124

Bar and rod, in coils, not further worked than cold-formed or cold-finished, of grade AISI 1010, 1015, 1018, 1020, 1022, 10B22 or 8620, of a diameter from 0.468 inches to 1.46 inches inclusive

125

Nitrated round bar, of grade C1045, of minimum yield strength of up to 100,000 psi

126

Wire, in coil, of grade AISI 10B35, silicon killed, with phosphate and polymer coating, of a diameter of 1.156 inches

127

Wire of iron or non-alloy steel, electro-galvanized

128

Flat-rolled product of stainless steel, electro-galvanized, coated with ethylene propylene diene monomer (EPDM), of a thickness from 0.015 to 0.025 inches inclusive, of a width from 1.265 to 1.796 inches inclusive

129

Flat-rolled product, of stainless steel, of a width of less than 600 mm, of any grade of the 300 Series

130

Rod or wire, of stainless steel, of grade 302, 304 SS, 316, 410 or 410 SS, of specification ASTM A493 or A555, annealed, soap coated, of a diameter from 0.2 inch to 0.672 inch inclusive

131

Flat-rolled product, hot-rolled, heat treated, of grade 4142, of a thickness from 0.25 inch to 12 inches

132

flat-rolled product of other alloy steel, cold-rolled, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 600 mm or more

133

Flat-rolled product, galvanized, of grade HSLA 50, of a minimum thickness of 0.17 inch

134

Flat-rolled product, galvanized, of grade HSLA 60, of a minimum thickness of 0.085 inch, of a width of 57.15 inches

135

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.066, 0.073 or 0.074 inch

136

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.083 inch, of a width of 41 inches

137

Flat-rolled product, galvanized, of grade HSLA 80, of a minimum thickness of 0.085 inch, of a width of 47.266 inches

138

Flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13 or M2, of a thickness from 0.25 inch to 12 inches, of a width greater than 600 mm

139

Flat-rolled product, rough machine and rotary ground, of grade M4, M2 or T15, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm

140

Flat-rolled product of other alloy steel, cold-rolled, spheroidized and annealed, of grade 4140 or SAE J404 4130, of a thickness from 2.9 mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive

141

Flat-rolled product of other alloy steel, not further worked than cold-rolled, of grade ASTM A980 M160 Martinsite (MART), of a width of 7.375 inches, with electrogalvanized coating 40G/40G

142

Flat-rolled product, rough machined and rotary ground, of grade 4140, 4142, O-1, A2, D2, S7, H13, 1V, 3V, 4V, 9V, 10V or 15V, of a thickness from 0.25 inch to 12 inches, of a width of less than 600 mm

143

Flat-rolled product of other alloy steel, galvanized, of specification MS 50002-LAC550Y620T G160/60U, of a thickness of 2.1 mm, of a width of 228.6 mm

144

High speed steel round bars, turned, peeled or centerless ground, surface finish, of grade M2, M4, T15, M42, Rex 20, Rex 45 or Rex 76, of a diameter of 0.125 inch to 24 inches inclusive

145

Bars and rods of other alloy steel, not further worked than hot-rolled, of alloy 4130, 4140, 4145, 4150, 4320, 4340, 52100, 8620, 8630, 8640 or 9310, vacuum degassed, fine grain, with a section size from 2.5 inches to 10 inches inclusive

146

Alloy or tool steel round bars, rough turned, peeled or centerless ground, surface finish, of grade 4140 HT, P20, O-1, L6, O6, A2, D2, H13, S7, LescoWear, 1V, 3V, 4V, 9V, 10V or 15V, of a diameter of 0.125 to 24 inches inclusive

147

Centrifugal cast tube, of alloy SL96L, of an outside diameter of 13 inches, of an inside diameter of 12.625 inches, of a length of 58.56 inches or 65.25 inches

148

Mechanical tubing, of grade 4140, of an outside diameter from 6 inches to 10 inches inclusive, of an inside diameter from 4 inches to 8 inches inclusive, of a wall thickness from 1 inch to 2 inches inclusive

149

Hollow profile, of stainless steel, of specification ASTM A511

150

Tube, seamless, of stainless steel, of grade 304, 316, 317 or 347, of a diameter from 1 inch to 3 inches inclusive, of a wall thickness from 0.125 inch to 0.2 inch inclusive

151

Tube, cold drawn, stress relieved and annealed, of grade AISI 4140 or 8630, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive

152

Tube, seamless, spray metal (SM), of grade AISI 4140 or 8630, of an outside diameter from 1.22 inches to 2.162 inches inclusive, of an inside diameter from 0.851 inch to 1.29 inches inclusive

153

Tube, seamless, quenched and tempered, cold drawn, of grade AISI 4130 or 4140, of an outside diameter from 1.25 inches to 2.375 inches inclusive, of an inside diameter from 0.851 inch to 1.476 inches inclusive

154

Tube, welded, of circular cross-section, electrical metallic tubing, conforming to standard UL 797

155

Hydraulic tube, of grade J525 1008 or 1010, of specification of ASTM SA/214, of an outside diameter of 0.625 inches or 0.750 inches, of a minimum yield strength of 25,000 psi

156

Tube, welded, of stainless steel, of circular cross-section, of specification ASTM A240 or A269, of an outside diameter of up to 4.5 inches inclusive

157

Tube, drawn over mandrel (DOM), of square or rectangular cross-section, of grade C1010 or C1026

158

Tube, welded, of stainless steel, of square rectangular cross-section, of specification ASTM A240

159

Aluminium strip, of grade 5052 H32/34, coated with thermoplastic polyolefin (TPO) and ethylene propylene diene monomer (EPDM), of a thickness of 0.024 inch

160

Geodesic dome for storage tanks, of aluminum, of a diameter from 20 inches to 125 inches

161

Aluminum coil, of alloy AA3105, painted or coated, of a thickness of 0.019 inch, of a width from 13 inches to 24 inches inclusive

162

Fuel tank, of aluminum, of 43 or 55 gallon, of dimensions of 62 inches by 20 inches by 24 inches, with inner poly fuel cell, with a black powder coat finish

163

Aluminum horseshoes

164

Aluminum bar, rod, tube or profile, of alloy 6105-T5, of a diameter of 3 inches, of a length of 15, 20 or 25 feet

165

Round stainless steel wire, of grade 302 or 304, of a diameter from 0.178 mm to 1.092 mm, nickel coated

166

Rectangular stainless steel wire, of grade 304, of a dimension of 6.35 mm by a dimension of 0.457 mm, nickel coated

167

Square or rectangular stainless steel wire, of grade 301 or 631, of a dimension from 0.089 mm to 18.128 mm by a dimension from 0.305 mm to 5.08 mm, soap coated

168

Tube, welded, of circular cross-section, electrical rigid metal conduit, conforming to standard UL 6

SCHEDULE 2

(Subsection 1(1) and paragraph 1(2)(b))

Item

Column 1

Description of Goods

1

Flat-rolled product, not further worked than hot-rolled, of grade 1037, of a minimum width of 47.375 inches

2

Flat-rolled product, cold-rolled, spheroidized, annealed, of grade 4130

3

Flat-rolled product, cold-rolled, annealed spring steel, of grade SAE 1095

4

Flat-rolled product, cold-rolled, in coils, spheroidized annealed, of grade 10B21

5

Flat-rolled product, galvannealed, of grade HSLA 70, of a minimum width of 44.125 inches

6

Flat-rolled product, galvanized, of grade HSLA 70, of a minimum width of 43.29 inches

7

Flat-rolled product, annealed spring steel of grade C1070 CR

8

Flat-rolled product, with polymer coating, of a thickness not exceeding 2.8 mm, of a width not exceeding 863 mm, meeting standard ASTM A929 or CSA G401

9

Flat-rolled product, cold-rolled, of AISI 1055 carbon steel

10

Flat-rolled product, cold-rolled, annealed strip steel, of grade C1050

11

Bar and rod of grade AISI 52100

12

I-section beams of iron or non-alloy steel

13

Unequal leg angles with dimensions exceeding 7 inches by 4 inches by 0.5 inch, of iron or non-alloy steel

14

Angle, shape and section, MC channels of a depth exceeding 3 inches

15

Angle, shape and section, C channels of imperial size exceeding C 12 inches by 25 lbs/ft

16

Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade 201, 304, 316, 321, 327, 409, 420, 430 or 450

17

Flat-rolled product, clad, plated or coated, of grade 4140

18

Flat-rolled product, clad, plated or coated, of grade 4142

19

Bar and rod, not further worked than cold-formed or cold-finished, of grade AMS 6425

20

Pipe and tube, seamless, of grade AISI 1026

21

Pipe and tube, seamless, of grade AISI 1045

22

Pipe and tube, of grade AISI 1526M

23

Pipe and tube, seamless, of grade 4140, of circular cross-section

24

Pipe and tube, seamless, of grade 4142, of circular cross-section

25

Pipe and tube, of grade 4140, vacuum degassed, of a minimum yield strength of 80,000 psi, of outside diameter from 3.25 inches to 8 inches inclusive

26

Pipe and tube, welded, of circular cross-section, of grade AISI 1526

27

Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 2 inches by 1.5 inches, of grade CSA G40.21, ASTM A252 or ASTM A500

28

Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 1.97 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513

29

Pipe and tube, straight seam, electric resistance welded, of rectangular (ERW) section, of dimensions of 2.36 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513

30

Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 1.57 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513

31

Pipe and tube, straight seam, electric resistance welded (ERW), of rectangular section, of dimensions of 4.72 inches by 2.36 inches, of grade CSA G40.21, ASTM A252, ASTM A500 or ASTM A513

32

Flat-rolled product, not further worked than hot-rolled, of grade CSA G40.21 350W or CSA G40.21 350W Category 1, of a thickness of 3.27 inches or 3.50 inches, of a width of 72 inches or 76 inches, of a length of 544 inches, 550 inches or 552 inches

33

Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.25 inches, of a width of 96 inches, of a length of 240 inches or 288 inches

34

Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.3125 inches, of a width of 120 inches, of a length of 240 inches or 288 inches

35

Hot-rolled abrasion resistant plate, of grade 200, of a thickness of 0.625 inches, of a width of 96 inches, of a length of 240 inches or 288 inches

36

Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2 mm

37

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 80, of a minimum thickness of 0.0756 inch, of a width of 51.975 inches

38

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.022 inch, of a width of 52.46 inches

39

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.037 inch, of a width of 40.34 or 47.695 inches

40

Flat-rolled product, not further worked than cold-rolled, of grade HSLA 60, of a minimum thickness of 0.0377 inch, of a width of 44 inches

41

High carbon cold rolled-strip, full hard and oscillated coils, of grade SAE 1035, of a thickness of 0.055 inch, of a width of 0.75 inches

42

Flat-rolled product of iron or non-alloy steel, spheroidized and annealed, of grade SAE J403 C1050 or C1050 SA, of a thickness from 2.9mm to 7.1mm inclusive, of a width from 33.78 mm to 245 mm inclusive

43

Special Bar Quality (SBQ) bars, of grade AISI C-1536, A-4623-M, C-1541-VM, OP15, A-4320-M, A-4138-M, A-4330-M or A-4142-M, of chemical analysis in accordance with ASTM A751, of tensile strength in accordance with ASTM A370, of hardness in accordance ASTM E18, of a diameter from 0.625 inches to 1.5 inches inclusive, of a length from 25 feet to 30.2 feet inclusive

44

Round bar, of grade C1045, of a diameter of 3.5 inches, turned, ground and polished (TG&P), of a minimum tensile strength of up to 100,000 psi

45

Round bar, of grade C1045, turned and polished (TP), of a diameter of 0.75 inch

46

Bar and rod, of grade 1537M, 4119M or 4318M, of a diameter from 19.05 mm to 30.16 mm inclusive

SCHEDULE 3

(Subsection 1(1) and paragraph 1(2)(c))

Item

Column 1

Business Number

Column 2

Description of Goods

Column 3

Period

Column 4

Conditions

1

100317619

Flat-rolled product of non-alloy steel, hot-rolled

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

10819401244311

10819401253950

10819401253949

10819401260891

10819401174636

10819401300047

10819401300684

10819401300515

10819401300504

10819401300526

10819401319969

10819401325570

10819401325455

10819401298599

2

861611671

Flat-rolled product of non-alloy steel, hot-rolled

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

10819401263440

10819401266283

10819401233513

10819401234558

10819401264806

10819401265578

10819401261073

10819401261062

10819401299727

3

869553560

Bars and rods, hot-rolled, in irregularly wound coils, of iron, non-alloy or other alloy steel, of grade 1006, 1008, 1012, 1015, 1018, 1030, 1042, 1053, 1055, 1057, 1063, 1067, 1070, 1072 or 1077, of a diameter from 5.5 mm to 16 mm inclusive

For goods imported on or after July 1, 2018

For use in manufacturing of steel wire

4

105120190

Flat-rolled product of iron or non-alloy steel, not in coils, not further worked than hot-rolled, of a width of 120 inches, of a length of 370 inches, of a thickness of 10, 11, 14 or 17 mm, of grade CSA G40.21 260 WT

From July 1 to August 31, 2018 inclusive

Goods ordered under Purchase Order Number 025578 dated May 17, 2018

5

864474002

Flat-rolled product of iron or non-alloy steel, steel shim stock, of a thickness of 0.008 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

6

864474002

Flat-rolled product, not in coils, hot-rolled, of specification MIL-STD-12560, MIL-STD-12560 Class 1, MIL-STD-46100, CMS18 or CMS 19

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

7

864474002

Flat-rolled product, of specification QT 100 (GD)LS (ASTM A514), of a thickness from 1.25 inches to 4.5 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

8

864474002

Tube, hot-rolled, of specification ASTM A519, of Grade 1026

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

9

864474002

Aluminum angle of grade 6061T6

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

10

819484965

Aluminum bar of alloy 6082

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

11

819484965

Bars and rods, hot-rolled, in irregularly wound coils, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

12

819484965

Bars and rods, not further worked than cold-formed or cold-finished, of grade 30MnVS6, 1008 MOD, 1018, 1038, 1541, 5140, 5140 H or 8615

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

13

896301165

Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled or cold-rolled, of grade 10B21, 1018, 1018 AK, 1018 SK, 1020, 1020 AK, 1055/1065, 4130, 4140, 8620, 340 XF, 420 XF, 550 XF or SPFH 590

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

14

874527823

Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than cold-rolled, of grade 1018 AK, 1018 SK, 1020 AK, 1050 or 8620

From July 1, 2018 to November 12, 2018 inclusive

For use in the manufacture of original equipment parts or other parts

15

870249416

Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of grade 080 XLF, 420 XF or 550 XF

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

16

710327693

Flat-rolled product of iron, non-alloy or other alloy steel, not in coils, not further worked than hot-rolled

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

12997083757544

12997083763018

12997732964952

12997231529029

12997083816818

17

894699818

Square bar, round bar or angle, of grade A588

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under the following transaction number (B3-3 Form):

17863105499904

18

894699818

Tube of square or rectangular cross-section, welded

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

17863105478362

17863105491882

19

894699818

Tube of circular cross-section

From July 1, 2018 to August 31, 2018 inclusive

For imports recorded under the following transaction number (B3-3 Form):

17863105502271

20

100763440

Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS6000, SCGA CR GA 270, MS.50002, SPH HR 590, GMW CR 340, GMW CR CR3¸ GMW CR 420, GMW HR HR1 or GMW CR 340

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

21

100763440

Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, M2020, M2027, SCGA GN DQ SK, SCGA GN EDDQ AK, GMW CR 420, GMW HR HR1 or GMW CR 340

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

22

100763440

Aluminum plates, sheets and strip, of alloy AA3004 or AA5000

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

23

100874247

Flat-rolled product of iron, non-alloy or other alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS 67, MS264, MS6000 or MS.50002

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

24

100874247

Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002 or GMW CR

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

25

100874247

Aluminum plates, sheets and strip, of alloy AA3004 or AA6000

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

26

899313571

Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled or cold-rolled, of specification SPH HR 370, SPH HR 440 or MS 67

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

27

899313571

Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000 or GMW CR

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

28

107304340

Flat-rolled product of iron, non-alloy, other alloy or stainless steel, not further worked than hot-rolled, pickled or cold-rolled, of specification MS66, MS67, MS264, GMW HR 340, SPC CR DQ SK, M1142, M2020, MS.50002, MS6000, SCGA GN DQ AK, SP GN DQ, GMW CR 270, GMW HR HR1 or M2020 CR

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

29

107304340

Flat-rolled product of iron, non-alloy or other alloy steel, clad, plated or coated, of specification MS6000, MS.50002, GMW CR, GMW HR, MS66, MS67, MS264 or SCGA GN

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

30

107304340

Aluminum plates, sheets and strip, of alloy AA3004, AA5000, AA6016, AA6061 or A93003

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

31

100086768

Flat-rolled product of iron or non-alloy steel, cut to length or configured blank, flat polished and/or treated with zinc phosphate and lube

For goods imported on or after July 1, 2018

For use in the manufacture of original equipment parts or other parts

32

123307597RM0020

Flat-rolled product, not further worked than hot-rolled, of specification MS66 or MS.50002

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

33

123307597RM0020

Flat-rolled product, clad, plated or coated, of specification GA6M55V 590 DT, GA6M66 HR 11, 6M66V 050XK, MS.50002, MS264 or GMW3032M-ST-S

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

34

123307597RM0020

Aluminum plates, sheets and strip, of specification MS-5007 5052-H32

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

35

123307597RM0013

Flat-rolled product, not further worked than hot-rolled, of specification MS50002, 6M55V035SK or 6M55HR12

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

36

123307597RM0013

Flat-rolled product, galvanized, of specification MS.50002, MS-6000 or WSD-1A333-A2

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

37

123307597RM0013

Flat-rolled product, not further worked than cold-rolled, of specification MS50002 or M1A333-A2

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

38

123307597RM0013

Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

39

123307597RM0013

Aluminum plates, sheets and strip, of specification 5052-H32-GMW15935M-AL-S-5000A-O or 5052-H32 GMW15192M-AL-S-5000-ST-90-U

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

40

123307597RM0013

Aluminum castings of alloy A356-T6

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

41

123307597RM0033

Flat-rolled product, hot-rolled, galvanized, of specification 6M55V-060, 50002, MS-6000, hot-rolled 060XK or LAX420Y480T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

42

123307597RM0033

Flat-rolled product, not further worked than cold-rolled, of specification MS-264-60XK or MS-264-35XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

43

123307597RM0033

Tube, of iron or non-alloy steel, welded, of circular cross-section, of specification 22MnB5 M

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

44

123307597RM0033

Hollow profile of aluminum, of alloy 6061 T6, of specification ASTM B221

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

45

123307597RM0023

Flat-rolled product of non-alloy or other alloy steel, galvanized, of a width of 26.38, 28.74, 37.205 or 32.125 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

46

123307597RM0023

Flat-rolled product, not further worked than hot-rolled, of a width of 10.18, 10.275 or 23.307 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

47

123307597RM0023

Flat-rolled product, not further worked than cold-rolled, of a width of 11.875 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

48

123307597RM0023

Flat-rolled product, galvanized, of a width of 9.5, 17.559 or 20.866 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

49

123307597RM0029

Flat-rolled product, not further worked than cold-rolled, of a boron and manganese alloy

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

50

123307597RM0029

Flat-rolled product, high strength low alloy steel, hot-rolled or cold-rolled, galvanized

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

51

123307597RM0029

Flat-rolled product, low carbon mild steel coil, with hot dipped galvanneal zinc coating

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

52

123307597RM0019

Flat-rolled product of other alloy steel, not further than cold-rolled, of a thickness of 0.89 mm, 1.33 mm or 1.65 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

53

123307597RM0019

Flat-rolled product of other alloy steel, electrolytically or otherwise plated or coated with zinc, of a thickness from 0.66 mm to 2.86 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

54

123307597RM0019

Flat-rolled of other alloy steel, not further worked than hot-rolled, of a thickness of 2.514 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

55

123307597RM0019

Aluminum plates, sheets and strip, of aluminum alloys, not clad, of a thickness from 0.97 mm to 1.94 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

56

123307597RM0022

Flat-rolled product, low carbon steel, cold-rolled, of specification MS-67

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

57

123307597RM0022

Flat-rolled product, cold-rolled, dual-phase or martensitic steel, electrogalvanized, of specification GMW3399M-ST-S

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

58

123307597RM0022

Flat-rolled product, cold-rolled, dual phase or mild steel, galvanized, of specification MS.50002 or GMW3399M-ST-S

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

59

123307597RM0022

Flat-rolled product, not further worked than cold-rolled, multi-phase or mild steel, of specification GMW3399M-ST-S or MS-67

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

60

123307597RM0022

Flat-rolled product, cold-rolled or hot-rolled, dual-phase, multi-phase or mild steel, electrogalvanized or galvanized, of specification MS.50002, GMW3399M-ST-S or GMW3032M-ST-S

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

61

123307597RM0022

Aluminum plates, sheets or strip, of alloy 6111-T4, of specification WSB-M2A152-A1

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

62

123307597RM0030

Flat-rolled product, not further worked than cold-rolled, of grade bake hardenednable, of a nominal thickness of 0.0394 or 0.0472 inches

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

63

123307597RM0030

Flat-rolled product, cold-rolled, of low carbon, high strength low alloy or dual phase steel, hot dipped with galvanneal zinc coating, of a nominal thickness from 0.0276 inches to 0.1575 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

64

896543659RM0006

Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of grade 1020, of a thickness of 2.4384 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

65

896543659RM0014

Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, pickled and oiled, of grade SAE J403 1010 or SAE J403 1022

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

66

849292990

Bars and rods, hot-rolled, in irregularly wound coils, of grade 9254, SUP12MT or HDS12, of a diameter from 11.9 mm to 17.9 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

67

849292990

Bars and rods, not further worked than hot-rolled, hot-drawn or extruded, of grade 5160, of a diameter from 19 mm to 40 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

68

849292990

Tubes and pipes, welded, of circular cross-section, of grade 15B27MC, 15B27M, 15B27, 15B30M or 15B34, of a wall thickness from 3 to 6 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

69

846263531

Semi-finished tubes of iron or steel, of an outside diameter of 4.5 inches to 7 inches inclusive or of an outside diameter of 9.625 inches, of a kind used in production of finished casing and tubing for oil or gas

For goods imported on or after July 1, 2018

Goods supplied by affiliated company

70

104546718

Flat-rolled product, in coils, galvanized, of specification ASTM A653 Grade 55

For goods imported on October 1, 2018 or after

Goods ordered under purchase number:

a) 27126 (March 28, 2018) – to be imported; or

b) 27273 (May 1, 2018) – imported under transaction number (B3-3 Form) 13177192286910

71

104546718

Flat-rolled product, in coils, galvanized, of specification 50002-DPC420Y780T

For goods imported on or after December 1, 2018

Goods ordered under purchase order number:

a) 26975 (February 15, 2018) – to be imported;

b) 26976 (February 15, 2018) – to be imported; or

c) 27278 (May 1, 2018) – to be imported

72

104546718

Flat-rolled product, in coils, galvanized, of designation Extra Deep Drawing Steel (EDDS)

For goods imported on November 1, 2018 or after

Goods ordered under purchase order number:

a) 27195 (April 13, 2018) - imported under transaction number (B3-3 Form) 13177193160546 and to be imported;

b) 27275 (May 1, 2018) – to be imported; or

c) 27276 (May 1, 2018) – to be imported

73

104546718

Flat-rolled product, in coils, galvanized, of specification 50002-LAC340Y410T

For goods imported on September 1, 2018 or after

Goods ordered under purchase order number:

a) 27274 (May 1, 2018) - to be imported;

b) 27277 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177193042586 and to be imported;

c) 27347 (May 23, 2018) - imported under transaction number (B3-3 Form) 13177192417019 and to be imported; or

d) 27350 (May 23, 2018) - imported under transaction number (B3-3 Form) 13177193267292, 13177191284006 and to be imported

74

104546718

Flat-rolled product, in coils, galvanized, of designation Deep Drawing Steel (DDS)

For goods imported on October 4, 2018

Goods ordered under purchase order number 27279 (May 1, 2018) - imported under transaction number (B3-3 Form) 13177192100313

75

104546718

Flat-rolled product, in coils, galvanized, of designation Commercial Steel (CS) Type B 1006

For goods imported on or after December 1, 2018

Goods ordered under purchase order number 27167 (April 10, 2018) – to be imported

76

104546718

Flat-rolled product, in coils, galvanized, of specification GMW3032M-ST-S 500LA

From August 1, 2018 to September 30, 2018 inclusive

Goods ordered under Purchase Order Number 27334 (May 16, 2018) - imported under any of the following transaction numbers (B3-3 Form):

13177190728943

13177191379943

13177191930996

13177191944060

77

104546718

Flat-rolled product, in coils, galvanized, of specification SAE J2340 550XF

From August 1, 2018 to September 30, 2018 inclusive

Goods ordered under Purchase Order Number 27359 (May 24, 2018) – imported under the following transaction number (B3-3 Form):

13177315258407

13177191780096

78

105492664

Flat-rolled product, galvanized, of specification GMW3032M-ST-S, GMW3399W-ST-SMS-6000 or HR660Y760T-CP

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

79

105492664

Flat-rolled product, not further worked than cold-rolled, of specification WSS-M1A365-A11, WSS-M1A365-A13, WSS-M1A367-A36, WSD-M1A333-A2 or GMW3032M-ST-S

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

80

105492664

Flat-rolled product, not further worked than hot-rolled, of specification WSS-M1A354-A20, WSD-M1A333-A1, WSS-M1A365-A22JSH270E, MS-6000, HR PO CQ 66, HR PO DQ 66, HR PO DQ AK 66, HR660Y760T-CP, SAEJ403, MS66, HR660Y760T-CP, MS.50002 or 6M44VA

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

81

105492664

Aluminum plates, sheets and strip, of alloy 6022-T4 or 1100

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

82

105492664

Aluminum extrusion

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

83

105492664

Tube, welded, of circular cross-section, of an outside diameter from 1 inch to 2.5 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

84

132644584

Flat-rolled product, not further worked than cold-rolled, of specification GMW3032M-ST-S-CR420LA

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

85

132644584

Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR780T/420Y-DP-HD60G60G-U, of a width of 241.30 mm or 472.44 mm, of a thickness of 1.2mm (+/− 0.6 mm)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

86

132644584

Flat-rolled product, of specification GMW3399M-ST-S-CR780T/420Y-DP-UNCOATED-U, of a width of 622.30 mm, of a thickness of 1.2mm (+/− 0.6 mm )

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

87

132644584

Flat-rolled product, galvanized, of specification GMW3399M-ST-S-CR980T/700Y-MP-LCE EG60G60G-U, of a width of 1187.45 mm, of a thickness of 1.2mm (+/− 0.6 mm)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

88

132644584

Flat-rolled product, galvanized, of specification 50002-LAC550Y620T G160/60 U, of a width of 228.60 mm or 647.70 mm, of a thickness of 2.10 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

89

104708409 or 809569957

Flat-rolled product of iron or non-alloy steel, not in coils, not further than hot-rolled, of classification DNV-GL Grade A, DNV-GL Grade A36, DNV-GL Grade D or DNV-GL Grade D36

From July 1, 2018 to April 30, 2019 inclusive

 

90

104708409

Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SAE J2340 CR550XF

From July 1, 2018 to December 31, 2018 inclusive

For use in the manufacture of original equipment parts or other parts

91

104708409

Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade SPC 980 DU-T

From July 1, 2018 to December 31, 2018 inclusive

For use in the manufacture of original equipment parts or other parts

92

104708409

Flat-rolled product of iron or non-alloy steel, in coils, not further than cold-rolled, of grade 4130 annealed

From July 1, 2018 to December 31, 2018 inclusive

For use in the manufacture of original equipment parts or other parts

93

861435121

Flat-rolled product, not further worked than hot-rolled, of specification MS-264-S-060XF, of a nominal thickness of 3 mm to 4 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

94

861435121

Flat-rolled product, not further worked than cold-rolled, of specification MS-67-S-DDQ CR06 Grade, of a nominal thickness of 0.76 or 0.8 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

95

861435121

Flat-rolled product, not further than hot-rolled, of specification GMW 3032M-ST-S-HR420 LA, of a nominal thickness of 2.5 mm or 3.5 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

96

861435121

Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR340 LA

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

97

861435121

Flat-rolled product, not further worked than cold-rolled, of specification GMW 3032M-ST-S-CR420 LA, of a nominal thickness from 0.5 mm to 0.8 mm inclusive

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

98

861435121

Flat-rolled product, not further worked than cold-rolled, of specification SAE J2340 340 XF, of a nominal thickness of 0.8 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

99

861435121

Flat-rolled product, not further worked than cold-rolled, of specification ASTMA 1008A DDS

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

100

897264149

Flat-rolled product, of non-alloy steel, not further worked than hot-rolled, pickled and oiled, of specification MS-264-035-SK or MS-66-CQ

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

101

897264149

Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-080-XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

102

897264149

Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-99V-040SK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

103

867876195

Flat-rolled product, of non-alloy steel, not further worked than cold-rolled, pickled and oiled, of specification MS-264-050-XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

104

867876195

Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55V-080XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

105

867876195

Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-55V-590DT, MS-6000-44A-DQ or MS-6000-55V-780TT

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

106

897419461

Flat-rolled product, of non-alloy steel, plated or coated with zinc, of specification MS-6000-55E-CR02 or MS-6000-99V-050XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

107

897419461

Flat-rolled product, of other alloy steel, plated or coated with zinc, of specification MS-6000-44VA-080XK, MS-6000-55PE-CR02, MS-6000-44A-DDQ, MS-6000-44A-DQ, MS-6000-55E-CR02, MS-6000-55V-690TT or MS-6000-55V-590DT

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

108

865927362

Aluminum profiles, of aluminum alloy

From July 1, 2018 to November 30, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

16865819296413

16865819296015

16865819296037

16865819305880

16865819316941

16865819323699

16865819325533

16865819326578

16865819340224

16865819357781

16865819363142

16865819367339

16865819367545

16865819383317

16865819387059

16865819388061

16865819400078

16865819407634

16865819414940

16865819415111

16865819422611

16865819425055

16865819447186

16865819455791

16865819469456

109

121306914

Flat-rolled product of iron or non-alloy steel, not further worked than cold-rolled, of specification 50002-CR02, 50002-CR04, 50002-DPC330Y590T, 50002-HR13, 50002-LAC340Y410T, 5000-LAC550Y620T, 50002-LAH340Y410T, 50002-LAH550Y620T or 50002-TRC400Y690T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

110

121306914

Flat-rolled product of iron or non-alloy steel, plated or coated with zinc, of specification 50002-CR02, 50002-CR04, 50002-DPC420Y780T, 50002-LAC550Y620T or 5002-TRC400Y690T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

111

121306914

Flat-rolled product of iron or non-alloy steel, not further worked than hot-rolled, of specification 50002-LAC340Y410T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

112

121306914

Flat-rolled product of iron or non-alloy steel, clad, plated or coated, of specification 50002-LAC340Y410T, 50002-LAH340Y410T or 50002-LAH550Y620T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

113

121306914

Tube or pipe, welded, of circular cross-section, of other alloy steel, of specification 50002-DPC420Y780T

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

114

121306914

Flat-rolled product of other alloy steel, not further worked than cold-rolled, of specification M2032 RP153-980

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

115

121306914

Flat-rolled product of other alloy steel, of specification GN DQ AK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

116

100355437

Tube, pipe or hollow profile, of stainless steel, of circular cross-section, welded or seamless, of grade 304L, of specification SAE J405/ASTM A240

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

117

100355437

Tube, pipe or hollow profile, of iron or non-alloy steel, welded, of circular cross-section, of grade 1008 or 1010, of specification TSG3150G/ASTM A513, SAE J403, SAE J525 or SAE J526

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

118

101238244

Aluminum plates, sheets and strip, of alloy 2024, 6061 or any alloy of the 7000 series (including alloy 7040, 7050, 7055, 7075, 7150, 7175 or 7474)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

119

101238244

Flat-rolled product, of grade Inconel 625 or Inconel 718

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

120

101238244

Bar and rod, of grade Inconel 625 or Inconel 718

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

121

100618719

Aluminum windows

For goods imported on October 27, 2018

For imports recorded under the following transaction number (B3-3 Form):

13284639341882

122

897270096

Aluminum doors or windows

From July 1, 2018 to July 31, 2018

For imports recorded under the following transaction number (B3-3 Form):

12997492696978

123

105347918

Bar and rod, not further worked than cold formed or cold finished, of other alloy steel, of 5150M grade steel

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

124

105347918

Bar and rod, of iron or non-alloy steel, of SAEJ403 1050 grade steel

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

125

866465701

Aluminum expansion joint covers

From August 3, 2018 to October 6, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

10215811360847

10215811545543

10215811682367

126

866465701

Aluminum expansion joint covers (models SBP-4-8-SP, HDNBL-2-4G, 6GW-4-8G, SBPL-4-8-SP, NBAF-6G, HDNB-2-4, CMX-4-8, CMX-2-4, CMX-6, CMXL-2-6, CMXL-3-6 or CMXL-4-8) or fire barrier insulation fiber (models 2HFFB-12, 2HFFB-9, 2HWFB-12 or 2HWFB-9)

From July 1, 2018 to March 31, 2019 inclusive

Goods purchased to fulfill subcontract 40467-2797-C dated December 1, 2017

127

865908990

Bar and rod, round, of grade 1215, of specification ASTM A29 or ASTM A108

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

128

865908990

Bar and rod, round, of grade 1144 stress proof, of specification ASTM A29, ASTM A108 or ASTM A311 Class B

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

129

100174457

Aluminum, doors or windows, and their frames

From July 8, 2018 to September 2, 2018 inclusive

For imports recorded under one of the following transaction numbers (B3-3 Form):

10215811289439

10215811310631

10215811381604

10215811439123

10215811461086

10215811495849

130

105507719

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated, of a thickness of less than 3 mm, hot dipped, Grade X

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

131

868987363

or

105507719

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, electrolytically plated or coated with zinc, of grade 40–60

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

132

868987363

or

105507719

Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or more, clad, plated or coated with zinc, of a thickness exceeding 1 mm, galvanized, of grade 40-60 Series: 316/317/327/330/341/342/344/625/627/629-CR

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

133

105507719

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, of part codes 262587P-01-03 .315 X 15.35, MS 264<S>035SK CHG or MS 6000<D>44VA-080XK

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

134

105507719

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, not clad, plated or coated, not further worked than cold-rolled (cold-reduced), of grade 60

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

135

868987363

or

105507719

Flat-rolled products of iron or non-alloy steel, of a width of less than 600 mm, galvanized, of grade 50-60

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

136

105507719

Flat-rolled products of other alloy steel, of a width of 600 mm or more, galvanized, of grade 60

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

137

868987363

or

105507719

Flat-rolled products of other alloy steel, galvanized, of grade 60

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

138

105507719

Flat-rolled products of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade 50

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

139

105179758

Bar and rod, Gray Iron and Ductile Iron Continuous Cast Dura-Bar, of grade 65-45-12, 80-55-06, 100-760-02 or 201-NI-RESIS

From July 1, 2018 to April 30, 2019 inclusive

 

140

122615503

Single Walled Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

141

122615503

Plain Annealed Single Walled Steel Tubing, meeting GM124M/GMW17334 requirements

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

142

122615503

Single Walled Cut to Length Steel Tubing with 5% Aluminum Zinc Coating, meeting GM124M/GMW17334 requirements

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

143

806775540

Pipe, polymer lined carbon steel, of polymer liner PTFE (Polytetrafluoroethylene), PVDF (Polyvinylidene), PP (Polypropylene) or PFA (Perfluoroalkoxy)

From July 1, 2018 to February 28, 2019 inclusive

 

144

101400760

Bar and rod, alloy solid steel bar, cold-rolled, of AMS or BMS specification

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

145

101400760

Bar and rod, of stainless steel, hot-rolled, of AMS or BMS specification

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

146

101400760

Bar and rod, of stainless steel, 321 Stainless Steel, of a diameter greater than 25mm, of AMS or BMS specification

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

147

101400760

Aluminum alloy plate or billet, of AMS or BMS specification, of a thickness greater than 7mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

148

101400760

Manifold Body Castings, of C355-T6 Aluminum

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

149

101400760

Aluminum bar and rod, of specification AMS or BMS, of a diameter greater than 12.7 mm

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

150

101400760

Aluminum tubing, of alloy 7075

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

151

866460074

Flat-rolled product, hot-rolled or cold-rolled, spheroidized and annealed, of grades J403 1045, J403 1050, J404 4140, J404 4130 or A506 4130

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

152

895418499

Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, hot-rolled, not clad, plated or coated, of a thickness of 4.75mm or more, of specification SPH440-OD or SPH590-OD

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

153

895418499

Flat-rolled product of iron or non-alloy steel, of a width of 600mm or more, cold-rolled, not clad, plated or coated, of a thickness exceeding 0.5mm but less than 3mm, of specification SPC270C, SPC270DU, SPC440, SPC590 or SPC590DU

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

154

131874299

Structures and parts of structures, of aluminum, of model number 750-BL, 750-BR, 550-BL, 550-BR, OR-20, BIB14-MI, BIB14-ML or BIB14-BR

From July 1, 2018 to April 30, 2019 inclusive

 

155

894141241RM0003

Flat-rolled product, of stainless steel, of a width of less than 600mm, not further worked than rolled, of part number 2144M5247-2 or 2144M5261-2

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

156

894141241RM0003

Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of part number 22521-1, 22587-1, 161A2126-4, 51406-1 or CEVM 300M

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

157

894141241RM0003

Aluminum castings, angles, shims, forge or sheets to be cut into shims, of part number 22573-1, 25207-1, 515Z3008-501W100R or 1003F6202C002

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

158

894141241RM0003

Bar, flat or rectangle, not further worked than forged, of part number 161A1210-1 or 161A1210-2

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

159

894141241RM0003

Bar and rod, not further worked than cold-formed or cold-finished, of part number 161A1311-1, 161A1128-3, 161A1128-4, 161A2111-9, 161A2122-1, 55-2381061-00, 25202-1, 1005731111-017 or 1159LM50159-13

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

160

894141241RM0003

Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of aluminum alloy, of part number 4557100025-004, 491Z1661-1, 495Z5511-7-MOD3, GD437-1051-7, 85216815-001, GD417-1606-3, GM147-0156-3/-4, 511Z3134-1, 1003M6322L001, 55-2355018-00, 1003M4003C001, 55-5059007-00, GC413-1238-1, 511Z3125-1, 82710621-103, 2143A6218-2, 32326-1, 2144M5286-1, 511Z3087-501, CC670-12213-3, QQA-250/12, 85714635-103, 83910542-101, S-AL-7050, 85713505-103, S-AL-7075-T7351, 1002720041-001 or 1005210117-001

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

161

894141241RM0003

Aluminum bar (Rectangular, Round or Square) or extrusions, of part number 85711616-102 or 85712210-101/-102

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

162

894141241RM0001

Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of grade A286, 17-4 PH, 15-5 PH, 17-4 PH, 347, 304L, 303Se, 347 or 303

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

163

894141241RM0001

Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, of grade 4130, 1095, MIL-S-22499 or CO NETIC

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

164

894141241RM0001

Flat-rolled product, of other alloy steel, of a width of less than 600 mm, not further worked than hot-rolled, of grade CO NETIC AA, CRES or AMIL-S-22499

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

165

894141241RM0001

Bar and rod, not further worked than hot-rolled, hot-drawn or extruded, of grade 625, 4130 or 4140

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

166

894141241RM0001

Tube, of stainless steel, round, seamless, hot drawn, of grade 304

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

167

894141241RM0001

Tube, round, seamless, hot drawn, of Grade 4130

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

168

894141241RM0001

Aluminum bar (rectangular, round or square) or extrusions, of grade 2024, 2219, 6061, 7075, 6063, 15-5 PH, 7075, 7150, 7055, 7136 or 2224

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

169

894141241RM0001

Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 6061, 7075, 7475, 5052, 6013, 6061, 7140, 7175, S3-6 or 1100

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

170

894141241RM0001

Formed aluminum can – tube with bottom, but no top, of grade 3003 or 1100

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

171

894141241RM0001

Aluminum castings, angles, shims or sheets to be cut into shims, of grade 6063, 2024, 356, 17-4PH, 3003, A356 or 15-5PH

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

172

894141241RM0001

Bar and rod, of stainless steel, not further worked than hot-rolled, hot-drawn or extruded, of circular cross-section, of grade A286, 17-4 PH, 15-5 PH, 347, 304L, 303Se, 347 or 303

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

173

894141241RM0004

Bar and rod, of part number R-ST-4330-4.000 DIA (alloy 4330), S-ST-4340-1.250 (alloy 4340) or S-ST-4340-1.250 X 2.000 (alloy 4340)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

174

894141241RM0004

Semi-finished product of other alloy steel, of Part Number S-ST-4130-0.080 (alloy 4130)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

175

894141241RM0004

Flat-rolled product, of other alloy steel, of a width of 600 mm or more, not further worked than hot-rolled, not in coils, Part Number R-ST-4340-1.750 DIA (alloy 4340)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

176

894141241RM0004

Bar and rod, part number R ST 4340-1.750 DIA (alloy 4340), R ST-4130-0.375 DIA or R ST 4130 0.625 DIA (alloy 4130)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

177

894141241RM0004

Aluminum plates, sheets and strip, of a thickness exceeding 0.2 mm, Part Number: S-AL-7050-T7452-3.500, S-AL-7050-T7452-600) (alloy 7050) or S-AL-7050 (alloy 7050) (-T7452)-5.500X5.500

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

178

894141241RM0004

Aluminum, castings, angles, shims, forge or sheet to be cut into shims, Part Number: C-#257T4401-3 alloy 356-T6, C-#2012B-2A-50 alloy 7175, C-#26211-1-CASTING alloy 7175-T74, C #40661-1 alloy 7175-T74, C-#40909-3 alloy 7175-T74, C-#46351-1-FORGING alloy 7075 or C #41 1211008-01 alloy 7075 - T7351

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

179

894141241RM0004

Bar and rod, of iron or non-alloy steel, Part Number R-ST-4330-4.000 DIA (alloy 4330), S ST-4340-1.250 (alloy 4340) or S ST 4340 1.250 X 2.000 (alloy 4340)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

180

100869130

Semi-finished product, of stainless steel, of rectangular (other than square) cross-section, of grade 13-8

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

181

100869130

Bar and rod, of stainless steel, not further worked than cold-formed or cold-finished, of grades 13-8, 15-5 or 465

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

182

100869130

Bar and rod, flat or rectangle, not further worked than forged, of grade 4330M

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

183

100869130

Aluminum bar (rectangular, round or square) or extrusions, of grade 7075

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

184

100869130

Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 2024, 2124, 2219, 7050, 7075, or 7140

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

185

100869130

Aluminum castings, angles, shims, forge, or sheets to be cut into shims, of grade 7050, 7075 or 356

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

186

804861284

Aluminum plates, sheets and strip, of a thickness exceeding 0.2mm, of grade 7175, 7475, 7050, 7075, 7010, 2024, 2124, 7040, 7140 or 7055

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

187

895418499

Flat-rolled product, of iron or non-alloy steel, not clad, plated or coated, of grade SPC270A, SPC270C, SPC270DU, SPC440, SPC590, SPC590DU, SPH440-OD or SPH590 OD

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

188

895418499

Flat-rolled product, of iron or non-alloy steel, clad, plated or coated, of grade SCGA270C-45, SCGA440-45, SCGA340HR-4 or SCGA340HR-45

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

189

895418499

Flat-rolled product, of iron, non-alloy or other alloy steel, in coils, of grade SPH270C-OD, SPH270C-OF, SPH590FC OF, SPH590SF-OD, SPC980DU, SPC980DUB or SPC1180DUB

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

190

895418499

Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of grade SCGA1180DUB-45, SCGA270D-45, SCGA270DU-45, SCGA590DU-45, SCGA980DUB-45 or SCGA1180DUB-45

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

191

105468391

Stainless steel wire, of a diameter of 0.188 inch, of grade 17-7 PH, of specification AMS 5678 CLASS C

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

192

105468391

Stainless steel plate, of a thickness of 2.5 inches thick, of grade 15-5 PH, of specification AMS 5862

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

193

105468391

Stainless steel rectangular bar, of specification AMS 5629 or 5643

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

194

105468391

Wire of stainless steel, part number MS20995C32

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

195

105468391

Stainless steel bar, of a diameter of 3.5 inches, of grade 4330, of specification AMS 6427

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

196

105468391

Aluminum bars, rods and profiles, of aluminum alloys, of specification AMS-QQ-A-200/3, AMS QQ A 200/3.19, AMS-QQ-A-200/11, AMS-QQ-A-200/15 or AMS-QQ-A-250/12

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

197

105468391

Aluminum plates, sheets and strip, of aluminum alloys, of specification AMS 4050, AMS 4078, AMS 5862, AMS-QQ-A-250/4, AMS-QQ-A-250/5, AMS QQ A-250/12, BAMS 516-002, AMS 516-003 or BAMS 7-323 TYPE 1

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

198

105468391

Other articles of aluminum, of the following descriptions and part numbers: nuts (BACC30M6, NAS1195DD3XH or NAS463XDD10), rivets (B0205017AD3-3.5S, BACR15BA3AD4C, BACR15BA4D4C, MS20426AD4-5, MS20470AD4-5A or NAS9302BNS-4-02), washers (BACS53B1EA2, NAS1149C0416R, NAS1149D0416H, NAS1149D0432K or NAS1149D1016K) or stand-offs (B0204040AL-18W)

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

199

883281107

Flat-rolled product, cold-rolled annealed, in coils, with percentage of chromium, molybdenum or manganese lower than standard for Grade 4140 or 4142

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

200

103333662

Bar and rod, cold-rolled, turned and polished, of 1045 grade steel, part number H200501400 or H200503600

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

201

100234301

Bars and rods of other alloy steel, of grade 4140, 4145, 4330V, EN30B, PremoMax or 8620, of a diameter from 0.5 inch to 20 inches inclusive

For goods imported on and after July 1, 2018

 

202

100234301

Bars and rods, of stainless steel, of grade high strength austenitic non-magnetic stainless steel 1515HS, 1515C, Datalloy, DNM-140 or Nitronic, of a diameter from 1 inch to 15 inches inclusive

For goods imported on and after July 1, 2018

 

203

100234301

Bars and rods, of stainless steel, of grade 317 or 347 or SCF19, of a diameter from 0.75 inch to 3 inches inclusive

For goods imported on and after July 1, 2018

 

204

801135500

Flat-rolled pressure vessel quality plate, not further worked than hot-rolled, of grade ASME SA-285-C

For goods imported on and after July 1, 2018

Imported for sale to company with business number 100569987

205

891784126

Concrete reinforcing bar, of grade 60, of specification ASTM A615/A615M, of a length of 300 mm to 850 mm inclusive, of a diameter from 15 mm to 30 mm inclusive

For goods imported on and after July 1, 2018

 

206

891784126

Concrete reinforcing bar, of grade 60, of specification A615/A615M, bent into an L shape with one length of 130 mm to 240 mm inclusive and the other length of 250 mm, of a diameter from 15 mm to 30 mm inclusive

For goods imported on and after July 1, 2018

 

207

103872651

Cold drawn bar, of grade 8620, with a diameter of up to 1.0625 inches, of minimum yield strength of 75,000 psi, of a hardness of 90 HRB to 26 HRC

For goods imported on and after July 1, 2018

 

208

104402078

or

809569957

Hot-rolled plate, of grade CSA G40.21 350AT Cat 3, of a thickness of more than 1.5 inches, of a width of more than 116 inches, of a length of more than 580 inches

For goods imported on and after July 1, 2018

Goods purchased under quote notice 18-0027 dated March 1, 2018 for project number 37195-0001

209

846855336;

144455847;

871196416;

782632293;

or

809935364

Flat-rolled product, not further worked than hot-rolled, of grade SA-517-B, quenched and tempered, of a thickness from 0.25 inches to 0.45 inches inclusive, of a width from 90 inches to 120 inches inclusive, of a length from 273 inches to 445 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

Goods imported for sale to company with business number 846855336

210

846855336;

144455847;

871196416;

782632293;

or

809935364

Flat-rolled product, not further worked than hot-rolled, of grade SA-517-E, quenched and tempered, of a thickness from 0.25 inches to 1.750 inches inclusive, of a width from 96 inches to 120 inches inclusive, of a length from 280 inches to 454 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

Goods imported for sale to company with business number 846855336

211

846855336;

144455847;

871196416;

782632293;

or

809935364

Flat-rolled product, not further worked than hot-rolled, of grade SA-612 or SA-612N, quenched and tempered, of a thickness from 0.492 inches to 0.721 inches inclusive, of a width from 101 inches to 121 inches inclusive, of a length from 253 inches to 417 inches inclusive

For goods imported on and after July 1, 2018

Goods imported for sale to company with business number 846855336

212

807325279

or

105497242

Round, Keystone and House shaped stainless steel wire, of grade 304L or 316L, annealed and cold rolled, of a width from 0.045 inches to 0.190 inches or of a diameter from 0.052 inches to 0.250 inches inclusive, of a height from 0.060 to 0.380 inches inclusive

From July 1, 2018 to April 30, 2019 inclusive

Goods imported for sale to company with business number 105497242

213

102521416

Stainless steel ingots of alloy 17-4, 304, 347 or GX-4

From July 1, 2018 to April 30, 2019 inclusive

 

214

895418499

Flat-rolled product of iron, non-alloy or other alloy steel, of specification SPC 440, SPH440, SPH590, SCGA270C, SCGA270D, SCGA270DV, SCGA340, SCGA440, SCGA590, SCGA980, SCGA 1100, SPC270C, SPC270D or SPC980

From July 1, 2018 to April 30, 2019 inclusive

Goods imported for sale to company with business number 105336598

215

104994397

Flat-rolled product, of iron, non-alloy or other alloy steel, clad, plated or coated, of specification HR550LA-70G&70G-G1, ASTM A463M, GM6178M, WSD-M1A295-A3 or SCGA270D-45

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

216

104994397

Aluminum plates, sheets and strip, of alloy AA5052-O/15935-AL-S-5000A, AA5052-H32 or SAE-J2340-340X

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

217

101603405

Flat-rolled product, of iron or non-alloy steel, of specification SPH590-OD, GMW3032M-ST-S-HR550LA, 50002-340Y470T, MS264, SPH270C-OD, SPH440-OD, SPH590-OD, WSS-M1A365-A20 or WSS-M1A367-A46

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

218

101603405

Flat-rolled product of iron or non-alloy steel, clad, plated or coated, of specification SHGA270C-45, 50001-PHS950Y1300T, 50002-LAC340Y410T, 50002-LAC380Y450T, MS6000-44VA-355K, 50002-CR02-ELECTRO-GLAV GI 60/60 U, 50002-LAC550Y620T or 50000-CR02-HD-GALVANIZED GI 60/60 U

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

219

101603405

Flat-rolled product of other alloy steel, of specification MS264, MS67, 50001-PHS950Y1300T, GMW3399M-STY-S-CR980T/700MP, WSS-M1A357-A1, GMW14400M-ST-S-HS1300T/950Y, 50002-LAC340Y410T, SPH270C-OD or SPH590-OD

From July 1, 2018 to April 30, 2019 inclusive

For use in the manufacture of original equipment parts or other parts

SCHEDULE 4

(Subsection 2(2))

Item

Column 1

Tariff Item

Column 2

Description of Goods

1

4412.39.00

Other, with both outer plies of coniferous wood, for use in Canadian manufactures

2

4811.59.00

Other, for use in Canadian manufactures

3

8903.10.00

Inflatable

4

8903.91.00

Sailboats, with or without auxiliary motor

5

8903.92.00

Motorboats, other than outboard motorboats

6

8903.99.90

Other

REGULATORY IMPACT ANALYSIS STATEMENT

(This statement is not part of the Order.)

Issues

In a measured and proportional response to unjustified tariffs applied by the United States (U.S.) on exports of Canadian steel and aluminum, surtaxes are applied on imports of steel, aluminum and other goods from the U.S. Given the long-standing integration of Canada–U.S. supply chains, the Government recognizes that Canadian countermeasures against U.S. imports can create challenges for Canadian manufacturers that rely on inputs imported from the U.S.

Following the assessment of requests for remission of surtaxes submitted by Canadian manufacturers, the United States Surtax Remission Order (the Order) came into force on October 11, 2018, to provide relief from surtaxes on imports of steel and aluminum in circumstances of short supply (e.g. for products that are not manufactured, or are not available in sufficient quantities, in Canada). Steel goods subject to the Order included certain steel plates, hot-rolled and cold-rolled sheets, bars, rods, pipes, tubes and stainless steel products. Aluminum goods included sheets and cans. The Order also provided remission of surtaxes for boats in certain situations of pre- existing contractual obligations, and goods imported temporarily for repair, alteration or storage.

The Order Amending the United States Surtax Remission Order (SOR/2018-205) [the amending Order] expands the scope of steel, aluminum and other goods eligible for remission of surtaxes to further address the challenges faced by Canadian manufacturers. This follows the assessment of additional requests for remission.

Background

On July 1, 2018, the United States Surtax Order (Steel and Aluminum) came into force to apply Canadian surtaxes of 25% on steel products, and 10% on aluminum products, imported from the U.S. Similarly, the United States Surtax Order (Other Goods) also came into force to apply surtaxes of 10% on various goods imported from the U.S. Under both orders, the surtaxes affect $16.6 billion of imports on an annual basis from the U.S.

Canadian manufacturers operating in a wide array of economic sectors including auto and auto parts, construction, defence, aerospace, processed metals, machinery manufacturing and energy infrastructure rely on inputs from the U.S., in particular steel and aluminum inputs.

To address the potential effects of the surtaxes, on July 11, 2018, the Government of Canada outlined the framework under which it would consider requests for remission of surtaxes on imports from the U.S. Remission represents an exception to the rules by providing relief from otherwise applicable surtaxes to address exceptional and compelling circumstances that, from a public policy perspective, are found to outweigh the primary rationale behind the application of surtaxes.

The Government considered requests for remission of surtaxes in the following instances:

  1. To address situations of short supply in the domestic market, either on a national or regional basis.
  2. Where there are contractual requirements, existing prior to May 31, 2018, for Canadian businesses to use U.S. steel or aluminum in their products or projects.
  3. To address, on a case-by-case basis, other exceptional circumstances that could have severe adverse impacts on the Canadian economy.

Objectives

The objective of the amending Order is to

Description

Pursuant to section 115 of the Customs Tariff, the amending Order remits surtaxes paid or payable on imports of certain steel, aluminum and other goods from the U.S.

Steel and Aluminum

The amending Order

Other Goods

The amending Order remits surtaxes for two additional goods that have been determined to be in short supply in Canada (i.e. plywood, paper and paperboard) imported by any importer on or after July 1, 2018. Remission for these goods will be limited to situations where such goods are used as manufacturing inputs.

Regulatory development

Consultation

Consistent with the approach taken for the Order, Canadian steel and aluminum producers were consulted on supply conditions in Canada in respect of the additional steel and aluminum goods claimed to be in short supply by the remission requesters. Their views informed the short supply determinations made by the federal interdepartmental committee in regard to providing remission of surtaxes for additional steel and aluminum goods in the context of the amending Order.

The amending Order was not prepublished. The necessary consultations with the steel and aluminum producers were carried out, as appropriate, to determine its scope of application.

Modern treaty obligations and Indigenous engagement and consultations

The Order does not impact Indigenous peoples rights and interests.

Instrument choice

Section 115 of the Customs Tariff provides the authority for the Governor in Council to remit surtaxes on the recommendation of the Minister of Finance.

Regulatory analysis

Benefits and costs

Canada continues to work towards the full and permanent removal of the unjustified and illegal U.S. tariffs on Canadian exports of steel and aluminum. To defend and protect the interests of Canada’s steel and aluminum industries and its workers, Canada’s surtaxes will remain in place until the U.S. eliminates its trade-restrictive measures against Canadian steel and aluminum.

In accordance with the criteria that have been set out, remission is provided in respect of goods where the negative effects of the surtaxes outweigh the benefits of their application. This includes goods where remission of the surtaxes provides relief to downstream manufacturers without undermining the broader purpose of the surtaxes.

Small business lens

There are no significant costs imposed on small business resulting from the amending Order. Small businesses claiming remission on a prospective basis (i.e. for imports after the date of coming into force of the amending Order) would make a claim for each applicable importation as part of the process of completing existing customs documentation requirements. Small businesses claiming a refund of surtaxes paid would submit forms requesting refunds for the surtax paid on importations, accompanied by supporting documentation establishing that the imported goods qualify for remission. The administrative burden would be limited as businesses would only make a few refund claims covering past transactions and would not need to make such refund claims on a continuous basis (i.e. surtaxes would be waived).

“One-for-one” Rule

The “One-for-One” Rule applies to the amending Order, as there is an administrative burden associated with applying for remission of surtaxes that have been paid. However, the amending Order is exempted from the “One-for-One” Rule, as it is related to tax and tax administration.

The administrative costs for Canadian businesses to claim remission of the surtaxes are expected to be limited. In regard to waiving surtaxes on a prospective basis (i.e. for imports after the date of coming into force of the amending Order), remission claims would be made for each applicable importation as part of the process of completing existing customs documentation requirements.

In regard to requesting a refund (i.e. for imports on which the surtax has already been paid), importers would submit forms requesting refunds for the surtax paid on importations, accompanied by supporting documentation establishing that the imported goods qualify for remission. The administrative burden would be limited as businesses would only make a few refund claims covering past transactions and would not need to make such refund claims on a continuous basis (i.e. surtaxes would be waived).

Regulatory cooperation and alignment

The amending Order is not related to a work plan or commitment under a formal regulatory cooperation forum.

Strategic environmental assessment

In accordance with the Cabinet Directive on the Environmental Assessment of Policy, Plan and Program Proposals, a preliminary scan concluded that the amending Order would not result in positive or negative environmental effects; therefore, a strategic environmental assessment is not required.

Gender-based analysis plus (GBA+)

No GBA+ impacts have been identified for the amending Order.

Implementation, compliance and enforcement, and service standards

Remission is only provided where warranted by exceptional circumstances. Surtaxes continue otherwise to apply as intended under the United States Surtax Order (Steel and Aluminum) and the United States Surtax Order (Other Goods).

Requests for remission of the surtaxes for steel, aluminum, and other goods continue to be considered on an ongoing basis. As warranted, further amendments may be made to expand the scope of application of remission of surtaxes.

The Canada Border Services Agency (CBSA) will assess any claims for remission made pursuant to the amending Order and will ensure compliance with its terms and conditions in the normal course of its administration of customs and tariff-related legislations and regulations. In doing so, the existing administrative framework will be leveraged to ensure that costs can be managed within existing resources. Any refund issued pursuant to the amending Order will be administered by the CBSA. Depending on the volumes and complexity of refund submissions, the CBSA strives to achieve a 90-day processing standard.

Contact

Paul Huynh
International Trade Policy Division
Department of Finance Canada
Ottawa, Ontario
K1A 0G5
Telephone: 613-369-3804